Related Manuals for Solplanet SOL11H
Summarization of Contents
Installation Environment
Mounting Location Requirements
Specifies requirements for solid support, proximity to fire, temperature, and humidity.
Pedestal Installation Guide
Step 1: Unpacking and Initial Check
Take the pedestal and accessories out of the package for inspection.
Step 2: Marking and Drilling Positions
Place pedestal, mark drilling points, drill holes, and insert expansion bolts.
Step 3: AC Supply Cable Routing
Route the incoming AC supply cable from underground or above ground.
Step 4: Cable Entry Options
Install AC supply cable through lower or upper holes on the pedestal.
Step 5: Remove Pedestal Cover and Grommet
Demount screws, cover, and sealing rubber from the pedestal.
Step 6: Prepare Grommet and Insert Cable
Make incision on grommet, thread cable, and secure grommet in pedestal hole.
Step 7: Secure Pedestal to Ground
Push cable through pedestal, exit, and tighten expansion screws with specified torque.
Step 8: Install Cable Holder and Hanger
Install cable holder and hanger using screws and specific torque.
Step 9: Remove Enclosure Covers
Remove bottom and top screws, then detach decorative and top covers.
Step 10: Mount EV Charger Unit
Attach the EV charger unit to the pedestal using screws and sealing rubber.
Step 11: AC and Communication Setup
Connect AC power and communication, referring to the EV charger guide.
Step 12: Install Back Cover and Final Fastening
Install the back cover and sealing rubber, then fasten the screws.
Step 13: Complete Final Assembly
Install top cover, decorative cover, and finalize the installation process.
Contact and Support
Service Contact Information
Provides website and company address for technical support and service requests.
Need help?
Do you have a question about the SOL11H and is the answer not in the manual?
Questions and answers