Yamaha IMX644 Manager Owner's Manual page 18

• Parameter editing area
Here you can use mouse operations to visually edit the various parameters. The screen that is shown will depend on the tab that's
selected.
• Screen switching tabs
1
1
[BLOCK] tab
Opens the BLOCK screen
you to make parameter settings.
2
[INPUT] tab
Opens the INPUT screen
3
[MATRIX] tab
Opens the MATRIX screen
4
[OUTPUT] tab
Opens the OUTPUT screen
5
[OUTPUT EQ] tab
Opens the OUTPUT EQ screen
channels 1 through 4.
6
[MISC] tab
Opens the MISC screen
back Suppressor.
7
[GPI] tab
Opens the GPI screen
tor, and the make/open status for each output port.
8
[MEMORY] tab
Opens the MEMORY screen
recall previously-saved settings.
2 3
(page 19). This shows a block diagram of the entire signal route from input to output, and allows
(page 23). Here you can edit the input channel parameters.
(page 24). Here you can specify the output channels to which the input channel signals are sent.
(page 25). Here you can edit parameters other than EQ for OUTPUT channels 1–4.
(page 26). Here you can edit the parameters of the 6-band equalizers provided for OUTPUT
(page 28). Here you can edit settings for functions such as Priority Ducker, Music Override, and Feed-
(page 30). Here you can specify the memory that will be recalled for each input port of the GPI connec-
(page 31). Here you can save your edited parameter settings in sixteen different memories, or
4 5 6 7 8
IMX644 Manager Owner's Manual
18