Download Print this page

Avigilon ALTA Video Intercom Reader Pro Installation Manual

Access control system

Hide thumbs

Table Of Contents

Table of Contents

Revisions
Table of Contents
Contents
Before You Start
Conducting Site Surveys
For more Information
Installation
Network Requirements
Selecting a Backup Battery
Mounting Options
Mount the Enclosure to the Wall
Install Access Control Core Without Mounting Bracket
Install Access Control Core with Mounting Bracket
Install the Core Series Boards in E1 Enclosure
Install the Elevator Core Series Boards in E1 Enclosure
Install the Core Series Boards in E2 Enclosure
Install the Core Series Boards in E4 Enclosure
Install the Core Series Boards in E6 Enclosure
Wiring Avigilon Readers
ACU and Wiegand Reader Wiring
Install the Smart Reader V2
Standard Reader
Mullion Reader
Install the Smart Keypad Reader
Standard Keypad Reader
Mullion Keypad Reader
Install the Embedded USB Smart Reader
Flush Mount
Desktop Mount for Use as an Enrollment Reader
Wiring
Install the Video Reader Pro
Specifications
Prerequisites
Installation
Network Security Best Practices
Install the Video Intercom Reader Pro
System Overview
Specifications
Prerequisites
Installation
Power the Video Intercom Reader Pro
Provision the Video Intercom Reader Pro
Standard Wiring Configurations
Wiring the Core Series 12/24V 4-Door Smart Hub
Wiring the Core Series 24V Elevator Smart Hub
Wiring the Core Series 12/24V 8-Door Smart Hub
Wiring the Core Series 12/24 8-Door Large Smart Hub
Wiring the Core Series 12/24 16-Door Large Smart Hub
Wiring Fail-Safe and Fail-Secure Lock Hardware
Advanced Wiring Configurations
Wiring Wiegand Readers to Avigilon Readers
Wiring to Legacy Panels and Mobile Gateway
Change I/O Types
Wire to Wiegand Devices on Core Series Smart Hubs
End-Of-Line Supervision
Provisioning Acus
Prerequisites
Power, Relay, Status, and Board ID Leds
Access Control Core Status Leds
Smart Reader Leds
Avigilon Pro Series Reader Leds
Add Acus Using Alta Control Center
Add Multiple Acus Using Quick Start Option
Add One ACU
Disable the Static Cloud IP Connection
Provisioning Options
Provision the ACU Using Open Admin App (Recommended)
Provision the ACU Using Alta Control Center on a Laptop
Test Internet Connection Using Open Admin App
Configure Network Settings Using Open Admin App
Change Network Settings
Set up Wi-Fi on the Access Control Core
Troubleshooting
Legacy Wiring
Resetting Acus
Soft Reset
Hard Reset
Reset Video Readers and Video Intercom Readers
Appendix: Best Practices - Wiring a REX to Your Avigilon Alta Access Control System
Wiring REX in Series with Mag Lock or Other Fail-Safe Hardware
Wiring REX with Video Reader Pro and Video Intercom Reader Pro
Regulatory
Can/Ulc 60839-11-1-16 Grade 1
Fcc
Iec 62368-1
Rf Radiation Hazard Warning
Industry Canada Notice and Marking
IC Rss-102
Warnings
Electrical Specifications

Quick Links

1 Installation
2 Wiring Avigilon Readers
3 Wiring
Download this manual

ACCESS CONTROL

SYSTEM

Installation Guide

Some hardware may show the Openpath logo.

Table of Contents

Need help?

Do you have a question about the ALTA Video Intercom Reader Pro and is the answer not in the manual?

Avigilon ALTA Video Intercom Reader Pro Installation Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Avigilon ALTA Video Intercom Reader Pro

Table of Contents