Troubleshooting Of Wireless Lan - Pioneer SC-LX85 Operating Instructions Manual

Symptoms Causes
Cannot listen to Inter- The firewall settings for compo-
net radio stations. nents on the network are cur-
rently in operation.
You are currently disconnected
from the Internet.
The broadcasts from an Internet
radio station are stopped or
interrupted.
The Home Media Gal- The remote control is not cur-
lery cannot be operated rently set to the Home Media
with the buttons on the Gallery mode.
remote control.
Remedies
Check the firewall settings for components on the
network.
Check the connection settings for components on
the network, and consult with your network service
provider if necessary (page 89).
There are cases where you cannot listen to some
Internet radio stations even when they are listed
in the list of Internet radio stations on this receiver
(page 50).
Press HMG to set the remote control to the Home
Media Gallery mode (page 50).
Troubleshooting of wireless
LAN
Network cannot be accessed via wireless
LAN.
Wireless LAN converter's power is not on.
(Wireless LAN converter's "Power", "WPS"
and "Wireless" indicators are not all lit.)
! Check that the USB cable connect-
ing the wireless LAN converter to the
receiver's DC OUTPUT for WIRELESS
LAN terminal is properly connected.
WLAN POW ERR is displayed on the receiv-
er's display window.
! There is a problem with the wireless
LAN converter's power supply. Turn the
receiver's power off, then disconnect
the USB cable, reconnect the USB cable
and turn the receiver's power back on.
! If WLAN POW ERR is still displayed
after repeating the above procedure
several times, there is a problem with
the receiver or the USB cable. Unplug
the receiver from the wall and call a
Pioneer authorized independent service
company.
The LAN cable is not firmly connected.
! Firmly connect the LAN cable (page 31).
Wireless LAN converter and base unit (wire-
less LAN router, etc.) are too far apart or
there is an obstacle between them.
! Improve the wireless LAN environment
by moving the wireless LAN converter
and base unit closer together, etc.
There is a microwave oven or other device
generating electromagnetic waves near the
wireless LAN environment.
! Use the system in a place away from
microwave ovens or others device gener-
ating electromagnetic waves.
Additional information
! Avoid using devices generating electro-
magnetic waves as much as possible
when using the system with the wireless
LAN.
Multiple wireless LAN converters are con-
nected to the wireless LAN router.
! When connecting multiple wireless LAN
converters, their IP addresses must be
changed. For example, if the wireless
LAN router's IP address is "192.168.1.1",
set the first wireless LAN converter's IP
address to "192.168.1.249", the second
wireless LAN converter's IP address to
"192.168.1.248", using values between 2
and 249 (such as "249" and "248") that
are not assigned to other wireless LAN
converters or to other devices.
Wireless LAN connections cannot be estab-
lished between the wireless LAN converter
and base unit (wireless LAN router, etc.).
! With the wireless LAN converter
connected to the receiver, turn the
receiver's power off, unplug the power
cord from the power outlet, then plug
the power cord back in and turn the
receiver's power on.
! Sets Network Standby to OFF and turn
the receiver's power off then back on.
! The wireless LAN converter must be set
in order to establish wireless LAN con-
nections. See Wireless LAN Converter on
page 91.
The wireless LAN converter is properly
connected to the receiver and the wireless
LAN converter's indicators are lit, but the
wireless LAN converter cannot be set from
the receiver (the settings screen cannot be
displayed).
! If DHCP in the receiver's IP settings is
set to OFF and the IP address has been
set manually, the IP address set in the
wireless LAN converter may not match.
En
14
103