Table of Contents
Advertisement
Connections
CONNECTING THE SPEAKERS
ACTIVE SUBWOOFER
(BUILT-IN POWER AMPLIFIER)
M
Connecting Speaker Wire
1.
Loosen the knob by turning counterclockwise.
2.
Insert the bare part of the wire into the hole in the side of each
terminal.
3.
Tighten the knob by turning clockwise to secure the wire.
M
Connecting the Speakers
1.
Press down the terminal tab on the back of the speaker.
2.
Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
3.
Connect the connecting plugs to the back of the AV Receiver.
•
Make sure the colors of the speaker terminals on the back of the
AV receiver match the colors of the connecting plugs.
18
HW-C700-C770S-C770BS-XAA_0609.in18 18
HW-C700-C770S-C770BS-XAA_0609.in18 18
FRONT (R)
PS-FC770S
PS-AW730
Speakers are provided with model HW-C770S/HW-C770BS only. Model HW-C700/C700B does not come with speakers.
One Active Subwoofer is provided, if you would like to use another, purchase it from the retailer where you bought the
player and connect it to the other SUBWOOFER OUT Jack.
When using Dolby Pro Logic IIz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT HEIGHT
Jack.
Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects
into the duct (hole).
Never touch speaker terminals while the power is on. Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
SURROUND ( R )
SURROUND BACK ( R )
SURROUND BACK ( L )
PS-RC770S
PS-BC770S
PS-BC770S
Model HW-C700/C700B
AV Receiver
Model HW-C770S/C770BS
CENTER
AV Receiver
PS-CC770S
FRONT SPEAKER
CENTER SPEAKER
SURROUND SPEAKER
SURROUND BACK SPEAKER
ACTIVE SUBWOOFER
SURROUND ( L )
FRONT (L)
PS-RC770S
PS-FC770S
HW-C700/C700B
HW-C770S/C770BS
PS-FC770S
PS-CC770S
PS-RC770S
PS-BC770S
PS-AW730
Black
Red
2010-06-09
2010-06-09
5:06:46
5:06:46
Hide quick links:
Advertisement
Table of Contents
