Angle Selection - JVC XVC26U - DVD/VCR Instructions Manual

Filename [XVC27U_08DVD.fm]
XVC27U_08DVD.fm Page 55 Thursday, January 15, 2004 12:18 PM

Angle Selection

You can enjoy a variety of scene angles if the DVD VIDEO disc
contains "multi-angle" parts, where multiple cameras were used
to shoot the same scene from different angles.
If the disc contains "multi-angle" parts, "
screen at the beginning of the "multi-angle" part when "ON
SCREEN GUIDE" is set to "ON".
During playback
When using the on-screen bar
A
Access the on-screen bar.
Press ON SCREEN twice. The on-screen bar appears on
the TV screen.
B
Select menu item.
Press w e to move the hightlight to
ENTER.
The following pop-up window appears under the selected
item.
Example: The first view angle is selected out of 3 view angles
recorded.
C
Select the view angle.
Press rt repeatedly to select the desired view angle,
then press ENTER.
Each time you press the button, the angle of the scene
changes.
To clear the on-screen bar
Press ON SCREEN.
NOTE:
When "X" appears on the TV screen in step C, the current
scene is not recorded from multiple angles.
Page 55
When using the ANGLE button:
A
Press ANGLE.
The following pop-up window appears on the TV screen.
Example: The first view angle is selected out of 3 view angles
" appears on the TV
B
Press rt or ANGLE repeatedly to select the desired
view angle.
Each time you press the button, the angle of the scene
changes.
, then press
The pop-up window disappears if no operation is done for
about 5 seconds.
Example:
1/3]2/3]3/3](Back to the beginning)
Masterpage:Right-No-Heading
Access the menu.
recorded.
Select the view angle.
1/3 1/3
1 2
1/3
3
15 January 2004 12:17 pm
55
EN