Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rowenta DR1021D1
Summarization of Contents
Important safety instructions
Before first use
When you first use the appliance, some smoke or a harmless odour may be produced or there may be a small discharge of particles.
What water to use?
Your appliance has been designed to use tap water.
PRODUCT DESCRIPTION
Water tank inlet cap
The cap for the water tank.
Heating light indicator
Indicates appliance status.
Steam head
The part that emits steam.
Removable water tank
Water tank that can be detached.
Foldable head
The steam head can be folded.
Steam button
Button to release steam.
On/Off button
Turns the appliance on and off.
Cord exit
Where the power cord exits the appliance.
Fabric brush
Accessory for fabric care.
Travel bag
Bag for storing or transporting the appliance.
BEFORE USE
Unfold the steam head
Ensure steam head is unfolded and locked before use.
Close the water inlet cap
Secure the water tank cap.
Remove the water tank
Detach the water tank by unscrewing it.
Open the water inlet cap
Open the cap to access the water tank.
Replace the water tank
Reattach the water tank securely.
ACCESSORIES
Using the fabric brush
Opens fabric weaves for better steam penetration.
Attaching the fabric brush
Align markings to attach brush correctly.
UTILIZATION
Plug in the appliance
Connect the power cord to the electrical outlet.
Wait before steaming
Wait 25 seconds after switching on before steaming.
Steam the garment
Press steam button with steam head vertical and unfolded.
Optimal Usage and Tips
Steam garment from top to bottom
Steam garment from top to bottom for best results.
Fabric care recommendations
Check fabric label and test synthetic fabrics for safety.
Warning: Never steam a garment while worn
Never steam a garment while it is being worn.
AFTER USE
Turn off the appliance
Switch off the appliance.
Unplug the appliance
Disconnect the appliance from the power outlet.
Allow appliance to cool
Wait one hour for the appliance to cool down before storing.
Remove the water tank
Detach the water tank by unscrewing it.
Empty the water tank
Open the water inlet cap and empty the tank.
Close the water inlet cap
Secure the water tank cap.
ANTI CALC
When to descale
Perform descaling if appliance performance decreases.
Ventilation for descaling
Perform descaling in a well-ventilated room.
Remove water tank for descaling
Detach the water tank by unscrewing it as marked.
Continuation of ANTI CALC
Prepare descaling solution
Mix 50% water and 50% white vinegar in the tank.
Start descaling operation
Plug in and switch on the appliance.
Wait before steaming
Wait 25 seconds before pressing steam button.
Steam fabric
Steam fabric until water tank is empty.
Rinse and refill tank
Rinse tank, refill with water, and close cap.
CLEANING
Allow appliance to cool
Wait one hour for the appliance to cool down completely.
Clean appliance exterior
Ensure appliance is unfolded and clean parts with a damp cloth.
Cleaning precautions
Never wash or rinse appliance directly over a sink.
TROUBLESHOOTING
No steam
Appliance is not plugged in or switched on, or water level is low.
Appliance does not heat
Appliance not plugged in, or water tank not correctly placed.
Water tank leaks
Water tank not correctly placed or has calcium build-up.
Reduced steam or spitting
Calcium build-up or using water with additives.
Steam stains or spitting
Appliance not rinsed enough after descaling or wrong liquids used.
Heating light turns off
Normal function, light cycles during heating regulation.
Water leaks from steam head
Appliance not completely unfolded or tilted for too long.
Need help?
Do you have a question about the DR1021D1 and is the answer not in the manual?
Questions and answers