Related Manuals for WALDIS Business 802
Summarization of Contents
General Information
Safety Instructions
Important safety warnings regarding door trapping and bolt retraction for safe operation.
Table of Weights
Lists the weights of various WALDIS safe models for transport and handling purposes.
Regulations and Insurance
Discusses anchoring requirements for safes under 1000 kg and warranty termination conditions.
Operating Elements
Identifies the input unit and handle, and notes hinge side variations.
Set-up
Explains the initial state of the safe regarding battery insertion and locking.
Installation
Positioning Against the Building Wall
Provides minimum distance requirements for positioning the safe relative to walls for door opening.
Disassembly, Interior Construction
Details the procedure for dismantling the safe's interior for anchoring, with specific notes for Eco models.
Anchoring the Safe
Details the process for securing the safe to the building structure, including clarification and preparation.
Table for Dimensions, Anchoring Holes
Provides measurements for drilling patterns for rear-wall and base anchoring of the safe.
Procedure for Anchoring
Outlines the step-by-step process for anchoring the safe using drop-in anchors and screws.
Assembly, Interior Construction
Details the process of reassembling the safe's interior components after anchoring.
Cable Entry / Power Connection
Explains the standard cable entry openings and options for mains connection, alarm, and LED illumination.
Need help?
Do you have a question about the Business 802 and is the answer not in the manual?
Questions and answers