Download Print this page
Nokia TA-1344 Get Started
Hide thumbs Also See for TA-1344:

Advertisement

Quick Links

Get Started
Nokia xx
TA-1341/TA-1344
1. Insert the SIM and memory
card
1. Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2. If you have a single-SIM phone, put a nano-SIM
card in slot 1 and a memory card in slot 2 on the
tray with the contact areas face down. If you have a
dual-SIM phone, put a nano-SIM card in slot 1 and
either a second SIM or a memory card in slot 2 with
the contact areas face down.
Tip: To find out if your phone can use 2 SIM cards,
see the label on the sales box. If there are 2 IMEI
codes on the label, you have a dual-SIM phone.
3. Slide the tray back in.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may dam-
age the card and the device and corrupt data stored
on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
80601010H001 V1.0
xxxxxxxxxx
Camera
Loudspeaker
Microphone
Headset connector
EN
Note: 5G may not be available when two SIM
cards are inserted in your phone. If you have two
SIM cards inserted, both SIM cards support 4G/3G/
2G. For more information on your SIM cards,
contact your service provider.
Flash
SIM and memory
card slot
Google Assistant/
Google Search key*
USB connector
Front camera
Earpiece
Volume keys
Power/Lock key/
Fingerprint sensor
*Google Assistant is not available in certain languages
and countries. Where not available, Google Assistant is
replaced by Google Search. Check availability at
https://support.google.com/assistant.
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB-C cable. You can also charge your
phone from a computer with a USB cable, but it may
take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
USB-C
USB micro-B
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
Microphone

Advertisement

loading
Need help?

Need help?

Do you have a question about the TA-1344 and is the answer not in the manual?

Questions and answers

Summarization of Contents