Table of Contents
Advertisement
1.
OVERVIEW.......................................................................................................................................... 1
2.
INSTALLATION................................................................................................................................... 4
2.1. VIDEO INPUTS AND OUTPUTS................................................................................................ 6
2.2. GENLOCK REFERENCE........................................................................................................... 6
2.3. DVI VIDEO CONNECTIONS ...................................................................................................... 6
2.4. AUDIO INPUTS .......................................................................................................................... 7
2.5. GENERAL PURPOSE INPUTS AND OUTPUTS....................................................................... 7
2.6. LTC AND SERIAL DATA INPUTS............................................................................................. 8
2.7. ETHERNET NETWORK CONNECTIONS ................................................................................. 8
2.8. GLINK FIBER OUTPUT (-G OPTION) ....................................................................................... 9
2.8.1. Care and Handling of Optical Fiber ................................................................................. 9
2.8.1.1. Safety ................................................................................................................ 9
2.8.1.2. Assembly........................................................................................................... 9
2.8.1.3. Labeling............................................................................................................. 9
2.8.1.4. Handling and Connecting Fibers..................................................................... 10
2.9. BREAKOUT PANELS (BHPS)................................................................................................. 11
2.9.1. 7767BHP-AUX .............................................................................................................. 11
2.9.2. Audio Breakout Panels.................................................................................................. 12
2.9.3. 3000MKT-AUX .............................................................................................................. 13
3.
SPECIFICATIONS............................................................................................................................. 14
3.1. SERIAL DIGITAL VIDEO INPUT ............................................................................................. 14
3.2. ANALOG VIDEO INPUT .......................................................................................................... 14
3.3. DIGITAL AES/EBU AUDIO INPUT (REQUIRES 7767VIP-AI-U)............................................. 14
3.4. ANALOG AUDIO INPUT (REQUIRES 7767VIP-AI-BAL)........................................................ 14
3.5. SERIAL DIGITAL VIDEO OUTPUT ......................................................................................... 14
3.6. DIGITAL (DVI) VIDEO OUTPUT .............................................................................................. 15
3.7. GLINK FIBER OUTPUT (-G OPTION) ..................................................................................... 15
3.8. GENLOCK INPUT .................................................................................................................... 15
3.9. LTC INPUT ............................................................................................................................... 15
3.10. GENERAL PURPOSE IN/OUT................................................................................................. 15
3.11. DATA INPUT/OUTPUT SERIAL PORT ................................................................................... 15
3.12. ELECTRICAL ........................................................................................................................... 16
3.13. PHYSICAL................................................................................................................................ 16
4.
STATUS LEDS .................................................................................................................................. 17
TABLE OF CONTENTS
Revision 1.8.7
7700 MultiFrame Manual
7767VIP™ Manual
7767VIP-i
Advertisement
Table of Contents
Related Manuals for evertz 7767VIP
Summarization of Contents
Installation
VIDEO INPUTS AND OUTPUTS
Details on the BNC connector inputs for composite analog, SDI, and HD/SDI video signals.
GENLOCK REFERENCE
Explanation of genlock signal synchronization for output video to a station reference.
DVI VIDEO CONNECTIONS
Information on DVI to VGA adaptors and supported computer input resolutions.
AUDIO INPUTS
Description of analog and AES audio input capabilities and breakout panel connections.
GENERAL PURPOSE INPUTS AND OUTPUTS
Details on GPI inputs and GPO outputs via SCSI connectors and breakout panels.
LTC AND SERIAL DATA INPUTS
Information on LTC input and serial data port availability on the SCSI connector.
ETHERNET NETWORK CONNECTIONS
Guide to connecting the 7767VIP via RJ-45 Ethernet port for control and firmware upgrades.
GLINK FIBER OUTPUT (-G OPTION)
Details on the optical G-Link output for extended display device connection via fiber.
Care and Handling of Optical Fiber
Safety guidelines and best practices for handling optical fiber connectors and cables.
BREAKOUT PANELS (BHPs)
Overview of available breakout panels for auxiliary I/O, audio, and serial communication.
7767BHP-AUX
Description of the 7767BHP-AUX breakout panel for auxiliary inputs and outputs.
Audio Breakout Panels
Information on the 7767VIP-AI-U and 7767VIP-AI-BAL breakout panels for audio support.
3000MKT-AUX
Details on the 3000MKT-AUX mounting bracket for 7767BHP-AUX units.
SPECIFICATIONS
SERIAL DIGITAL VIDEO INPUT
Specifications for SMPTE 292M and 259M-C serial digital video inputs.
ANALOG VIDEO INPUT
Specifications for NTSC, PAL, and ITU624-4 analog video inputs.
DIGITAL AES/EBU AUDIO INPUT (REQUIRES 7767VIP-AI-U)
Specifications for digital AES/EBU audio inputs, including sampling rate and resolution.
ANALOG AUDIO INPUT (REQUIRES 7767VIP-AI-BAL)
Specifications for analog audio inputs, including channel count and signal levels.
SERIAL DIGITAL VIDEO OUTPUT
Details on the configurable SD-SDI or HD-SDI serial digital video output.
DIGITAL (DVI) VIDEO OUTPUT
Specifications for the DVI 1.0 output, supporting resolutions up to WUXGA.
GLINK FIBER OUTPUT (-G option)
Specifications for the GLINK optical fiber output, including wavelengths and output power.
GENLOCK INPUT
Specifications for the NTSC/PAL genlock input signal.
LTC INPUT
Specifications for the balanced LTC input signal.
GENERAL PURPOSE IN/OUT
Specifications for general purpose opto-isolated inputs and relay outputs.
DATA INPUT/OUTPUT SERIAL PORT
Specifications for RS-232 or RS-422 serial data input/output ports.
ELECTRICAL
Electrical specifications including voltage, power consumption, and EMI/RFI compliance.
PHYSICAL
Physical specifications such as number of slots and enclosure types.
STATUS LEDS
MODULE STATUS LEDS
Explanation of the green MODULE STATUS LED and the red LOCAL FAULT LED.
VIDEO STATUS LED AND CARD EDGE 4-CHARACTER DISPLAY
Description of user components at the card edge: Toggle Switch, Local Fault LED, Dot Matrix Display, and Push Button.
MODULE CONFIGURATION
CONFIGURING THE MODULE USING THE MODULE SERIAL PORT
Steps to configure IP address, subnet, and SNMP TRAP destination via serial port.
Network Configuration
Setting IP address, Netmask, Gateway, and Broadcast Address for the VIP module.
SNMP Configuration
Configuring the TRAP destination IP address for SNMP monitoring.
UMD Setup
Setting up dynamic UMD protocols and input types using the serial port.
Auxiliary Serial Port Setup
Configuring baud rate, data bits, parity, and stop bits for the auxiliary serial port.
Custom Output Resolution
Setting non-VESA standard output resolutions by adjusting horizontal and vertical parameters.
GPI to Custom Layout Assignments
Binding presets to GPI triggers for custom layout control.
Onboard Server Configuration
Enabling onboard server, DCPd, SYMPHd, and setting DCP IP address.
CONFIGURING THE VIP TO WORK WITH THE 3000DCP DESKTOP CONTROL PANEL
Steps to integrate the VIP module with the 3000DCP desktop control panel.
DCP Button Layout
Reference diagram of the 3000DCP button layout for display and preset functions.
DCP Overview
Explanation of D1-D20 display presets and P1-P20 custom presets, including Panel Lock.
CONFIGURING THE MODULE VIA THE CARD EDGE MENU
Navigating the card-edge menu system to configure module parameters.
Configuring the Display
Setting output refresh rate, resolution, layout presets, and background options.
Configuring the Audio Sources
Mapping audio sources from video inputs to AES outputs or analog audio.
Configuring the Video and Audio Router
Selecting SDI output mode, enabling video router, and routing audio to AES output.
Configuring the RGB gamma, gain and black level control for DVI output
Adjusting RGB gamma, gain, and black level for DVI output color correction.
Controlling Miscellaneous Card Functions
Performing a factory reset for the module.
MVP/VIP MAESTRO SOFTWARE
Configuring the Alarms
Instructions for setting up and configuring alarms within the Maestro software.
Configuration of Alarms in Maestro
Steps to launch Maestro, create a system, and configure alarms for VIP modules.
Adjusting Parameters for Alarms in VLPro – C
Fine-tuning alarm parameters like video loss duration and reset duration using VLPro.
Configuring the Traps
Setting up SNMP traps to log or alert on specific fault conditions.
USER JUMPERS
SELECTING WHETHER LOCAL FAULTS ON THE BOTTOM BOARD WILL BE MONITORED BY THE GLOBAL FRAME STATUS
Configuring the FRAME STATUS jumper on the bottom board for fault monitoring.
SELECTING WHETHER LOCAL FAULTS ON THE TOP BOARD WILL BE MONITORED BY THE GLOBAL FRAME STATUS
Configuring the FRAME STATUS jumper on the top board for fault monitoring.
CONFIGURING THE MODULE FOR FIRMWARE UPGRADES VIA SERIAL PORT
Procedure for using the RUN/UPGRADE jumper for firmware updates.
SETTING THE GPI INPUT PULL-UP VOLTAGE
Setting the GPI SUPPLY jumper for 5V or 12V pull-up voltage for GPI inputs.
UPGRADING FIRMWARE
UPGRADING THE FIRMWARE USING FTP
Detailed steps for updating firmware via FTP, including IP address determination and file transfer.
Step 1 – Determine the IP Addresses
Ensuring PC and VIP are on the same subnet for FTP upgrade.
Step 2 – Establishing a Valid Network Connection
Connecting PC to VIP and opening a DOS window to test network connectivity.
Step 3 – Upgrading the Application Code
Using FTP to transfer the firmware file to the VIP module.
Step 4 – Completing the Upgrade
Rebooting the unit after successful firmware transfer and disconnecting cables.
UPGRADING THE FIRMWARE USING RS-232 SERIAL CABLE
Alternative method for firmware updates using an RS-232 serial cable and Xmodem protocol.
Step 1 Setup
Connecting the serial upgrade cable and configuring terminal program settings.
Step 2 – Invoke Upload Mode from the Terminal Program
Powering up the VIP and aborting boot-up to enter upload mode.
Step 3 – Uploading the New firmware
Transferring the firmware file using X-Modem protocol via the terminal program.
Step 4 – Completing the Upgrade
Power cycling the unit after firmware upload and disconnecting the serial cable.
VISTALINK® REMOTE MONITORING/CONTROL
What is VISTALINK®?
Overview of VistaLINK as Evertz's remote monitoring and configuration platform using SNMP.
Need help?
Do you have a question about the 7767VIP and is the answer not in the manual?
Questions and answers