Motorola XPR 6550 User Manual

XPR 6300/6350/6500/6550
Digital Portable Radio
Quick Reference Card
Product Safety and RF Exposure Compliance
Before using this product, read the operating instructions
!
for safe usage contained in the Product Safety and RF
Exposure booklet enclosed with your radio.
a u t i o n
ATTENTION!
This radio is restricted to occupational use only to satisfy
FCC RF energy exposure requirements. Before using this
product, read the RF energy awareness information and
operating instructions in the Product Safety and RF
Exposure booklet enclosed with your radio (Motorola
Publication part number 6881095C98) to ensure
compliance with RF energy exposure limits.
3-Position
On/Off/
Volume Knob
Top Side
Button
_ _ _ _ _ _ _
PTT Button
Side Button 1
_ _ _ _ _ _ _
Side Button 2
_ _ _ _ _ _ _
Menu Button
Write your radio's programmed features on
the dotted lines.
Select a Zone Using the Menu
1 Press U until
2 Press D, E, or F directly below ZONE.
3 Press U until the zone you desire is shown
OR
Use the keypad directly to dial the zone
number.
4 Press h to confirm, or press PTT to transmit.
Select a Channel
Method 1: Using the Select Knob
After selecting the desired zone, turn the 16-
16-Position
position Select Knob to the desired channel.
Select Knob
Top Button
Method 2: Using the Menu
_ _ _ _ _ _ _
1 Press U until
Display
2 Press D, E, or F directly below CHAN.
Home button
3 Press U until channel you desire is shown
Keypad
4 Press h to confirm, or press PTT to transmit.
Speaker
Send an Emergency Alarm
1 Radio on and press Emergency button. You
see red LED; you hear short, medium-pitched
tone.
2 Display shows
3 When acknowledgment is received, you hear
four tones;alarm ends;radio exits emergency.
Send Silent Emergency Alarm
1
ZONE
2
3
Answer a Phone Call
1
2
3
4
CHAN
Send a Phone Call
1
2
3
4
.
EMERGENCY
Radio on and press Emergency button. You
see no LED; you hear no tone.
Press PTT.
Alarm continues until you exit by:
• Press and hold Emergency button for one
second.
OR
• Press PTT again.
Phone-like ringing, LED flashes GREEN,
PHONE CALL and m are displayed.
Press Call Response button.
Press PTT button to talk; release to listen.
Press h to hang up.
Press U until
PHON
Press D, E, or F directly below PHON.
Press U or V to scroll to phone number.
Press PTT (or Quick Access button, if
programmed) to talk, release to listen.