Download Print this page
Aeromotive 11108 Installation Instructions Manual

Aeromotive 11108 Installation Instructions Manual

Fuel pump
Hide thumbs Also See for 11108:

Advertisement

Quick Links

This product is not legal for sale or use on emission-controlled vehicles except when used as a direct
replacement part matching OEM specification.
potential ignition sources. Extinguish all open flames, prohibit smoking and
eliminate all sources of ignition in the area of the vehicle and workspace before
proceeding with the installation. Ensure you are working in a well ventilated area
with an approved fire extinguisher nearby.
Installation of this product requires modification to a fuel tank/ the fuel
system, failure to satisfy all safety considerations will result in fire, explosion,
injury and/or loss of life to yourself and/or others. All fuel system components
MUST be located as far from heat sources as possible, like exhaust, engine block,
etc.
due to incorrect maneuvering or technical errors. A falling object can cause
injury and/or loss of life to yourself and/or others. When working under the
vehicle, always use stands, and ensure that the ground or floor is stable and
level. Never crawl under a vehicle which is only supported by a jack.
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure
appropriate safety appeal. A drilling operation will cause flying metal chips. Flying
metal chips can cause eye injury.
Installation of this product requires detailed knowledge of automotive systems
and repair procedures. We recommend that this installation be carried out by a
qualified automotive technician. Careless installation of this product can result in
damge to the product, injury or loss of life to yourself and/or others.
Always be aware of flammable situations. Drilling and grinding can be
Mechanical and hydraulic lifting devices can tip over or lower accidentally
The fuel system is under pressure. Do not open the fuel system until the
When installing this product always wear safety glasses and other
AEROMOTIVE
Part # 11101, 11108 & 11151
A1000 Fuel Pump
INSTALLATION INSTRUCTIONS
WARNING!
WARNING!
WARNING!
WARNING!
CAUTION!
CAUTION:
.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 11108 and is the answer not in the manual?

Questions and answers

Summarization of Contents

A1000 Fuel Pump Installation Instructions
Safety Warnings and Cautions
Crucial safety advisories regarding flammable situations, system pressure, and handling hazards.
Compatible Fuels
Lists approved fuel types for the A1000 Fuel Pump.
System Requirements for Installation
Outlines necessary components and configurations for proper pump function.
Installation Steps
Detailed instructions for mounting the pump and connecting fuel lines.
System Diagrams and Wiring
Visual guides for EFI/Carbureted systems and electrical hookup.
Post-Installation Checks and Testing
Procedures for verifying fuel pressure, securing components, and test driving.
Fuel System Troubleshooting
Troubleshooting Flowchart
Diagnostic guide for pump not running or performing poorly.
Technical Bulletin #101: Fuel Filtration
Inlet Filtration Requirements
Explains why 100-micron inlet filters are critical for pump longevity.
Outlet Filtration Requirements
Details the need for finer filtration on the outlet side.
Contact Us
Aeromotive Contact Information
Provides phone numbers, email addresses, and mailing address for inquiries.
Aeromotive Limited Warranty
Warranty Terms and Conditions
Outlines the product warranty period, coverage, and limitations.