Related Manuals for Blizzard BIM90
Summarization of Contents
Important Information
Warning Labels and Symbols
Details warning labels for hazardous materials, voltage, and rotating parts, plus symbol meanings.
Warning and Safety Instruction
General Safety Precautions
Covers usage restrictions, installation by professionals, handling, grounding, ventilation, and electrical safety.
General
Usage Scenarios and Restrictions
Describes typical use cases and states the machine is not intended for home use.
Installation
Location Requirements
Specifies indoor location, altitude, ambient temperature, power supply, water source, and ventilation.
Installation Diagram
Visual guide showing water inlet, drain, power cord, and water filter connections.
Installation Steps
Step-by-step guide for checking, cleaning, positioning, and connecting the ice maker.
Startup and Operation
Initial Checks and Startup Procedure
Pre-startup checks, power-on sequence, and confirmation of normal operation.
Operation Details
Explains self-check, preparing, ice making, ice harvest, shutdown, bin full stop, and repeat ice-making.
Instruction of Control Panel
Control Panel Overview and Functions
Details LED display, lamps, thickness adjustment, cleaning function, switch, voice features, and safety shutdowns.
Maintenance
Exterior Cleaning
Instructions for cleaning the outer enclosure and maintaining stainless steel surfaces.
Inlet Water Filter Maintenance
Guidance on inspecting and replacing the inlet water filter element regularly.
Interior Cleaning and Sanitizing
Procedures for cleaning the ice storage bin and related components with detergent/sanitizer.
Condenser and Water Pipe Care
Maintenance steps for the condenser fins and water pipes, including wintering.
Clean Function Procedure
Step-by-step guide for initiating and completing the auto clean and sterilizing cycles.
Service Call
Pre-Service Troubleshooting Checks
Checks for water supply, power, and recording machine details before contacting service.
Need help?
Do you have a question about the BIM90 and is the answer not in the manual?
Questions and answers