Related Manuals for EVGA 08G-P4-6284-KR
Summarization of Contents
Product Introduction and Compatibility
Overview and Compatibility Check
Details the EVGA Hybrid Cooling Kit, compatible cards, and pre-installation checks.
Before You Begin Installation
Pre-installation instructions and compatibility verification before starting the process.
EVGA Hybrid Cooling Kit Installation Steps
Step 1: Remove Backplate
Instructions for removing the backplate from the graphics card.
Step 2: Remove Original Cooling Solution
Guides on removing the original heatsink/fan and baseplate.
Step 3: Mount Bracket Screw
Instruction to mount a single screw and nut onto the bracket.
Step 4: Clean GPU Surface
How to clean the GPU with isopropyl alcohol for thermal compound removal.
Step 5: Install VRM Heatsink
Securing the new heatsink and fan over the VRM with a single screw.
Step 6: Mount Waterblock
Attaching the waterblock to the card using spring-loaded screws.
Step 7: Connect Fan and Pump Cables
Connecting the waterblock pump and fan to the graphics card.
Step 8: Route Wires Under Heatsink
Using heatsink fins to route wires neatly parallel to the PCB.
Step 9: Secure Tubing with Rubber Insert
Attaching a rubber insert to hold tubing and route fan connector.
Step 10: Connect LED Power Cable
Plugging the 2-pin LED cable from the shroud into the LED header.
Step 11: Place Back PCB Thermal Pad
Placing a thermal pad on the back of the PCB.
Step 12: Install Shroud and Backplate
Placing and securing the shroud and backplate to the card.
Important Information and Warranty
Important System Information
Details on AIO system, self-contained nature, leak testing, and compatibility.
Warranty and Liability
Information on the 1-year warranty and EVGA's liability for damage.
Need help?
Do you have a question about the 08G-P4-6284-KR and is the answer not in the manual?
Questions and answers