Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SONNOC SNP-LU740E
Summarization of Contents
Notices
Copyright and Trademarks
Information on copyright and product trademarks.
General Information
General information and Sonnoc's right to make changes.
Warranty
Details on product warranty availability.
Preventative Maintenance
Importance of performing scheduled maintenance to avoid voiding warranty.
Regulatory
Product compliance with FCC and other regulatory standards.
Environmental
Information on product recycling and disposal.
Introduction
Safety and Warning Guidelines
Essential safety guidelines for installing and operating the projector.
AC/Power Precautions
Precautions for safe usage of AC power and connections.
Installation Safety and Warning Guidelines
Guidelines for safe installation procedures and potential hazards.
Laser Safety Precautions
Crucial safety information regarding laser operation and eye protection.
Batteries Precautions
Important safety notes regarding battery handling and disposal.
3D Safety Information
Recommended precautions for using the 3D display feature.
Photosensitive Seizure Warning
Warnings about potential health effects from flashing images.
Product Labels
General Hazards
General warnings applicable to accessories and product operation.
Fire and Shock Hazard
Critical warnings about fire and electrical shock risks.
Electrical Hazard
Specific warnings related to the risk of electric shock.
Adjusting the Size and Position
Adjusting the Projected Image
Adjusts the projected image's height and horizontal tilt for better viewing.
Adjusting the Projector's Height
Uses elevator feet to adjust the image height.
Geometry Correction
Adjusting Pixel Phase
Adjusts pixel phase for analog RGB signals to reduce shimmer or noise.
Setting the Position of Display Image
Moves the image vertically or horizontally to correct position.
Setting the Digital Size of Display Image
Enlarges or compresses the display image horizontally or vertically.
Setting the Digital Position of Display Image
Changes the display image position horizontally or vertically.
Saving Geometry Correction
Saves warp and blend settings to projector memory.
Applying Geometry Correction
Applies previously saved geometry settings to the projector.
Adjusting Horizontal Keystone
Corrects keystone shape where borders are unequal or slanted.
Adjusting the Vertical Keystone
Corrects keystone shape where borders are unequal or slanted.
Adjusting Horizontal Pincushion
Corrects pinched image shape with curved horizontal lines.
Adjusting Vertical Pincushion
Corrects pinched image shape with curved vertical lines.
Adjusting 4-Corner
Corrects the four corners of the projector's display image.
Enabling Auto Warp Filter
Improves sharpness and reduces ghosting automatically after geometry correction.
Adjusting Warp Filter
Manually adjusts warp filter to reduce ghosting.
Resetting Geometry Correction Setting
Resets all geometry correction parameters to default.
Enabling Basic Image Blending
Configures blends to create a single, seamless image with neighboring projectors.
Blending Multiple Images
Manually configures edge blends using Sonnoc Twist for multiple projectors.
Adjusting the Image Settings
Adjusting the Brightness
Adjusts the intensity of the image.
Adjusting the Contrast
Adjusts the difference between lightest and darkest parts of the image.
Adjusting the Color Space
Determines how color components are decoded for accurate color.
Adjusting the Image Sharpness
Adjusts the edge clarity of the image.
Setting up 3D Display
Configures timing and environment for displaying 3D images.
Setting 3D Format
Sets the 3D format according to the 3D input signal.
Inverting 3D Signal
Swaps image sequence for correct L/R eye display.
Setting the 3D Sync Output Signal
Controls and processes the 3D sync output signal.
Setting the Frame Delay
Eliminates odd colors and cross talk caused by timing differences.
Configuring the Video Settings
Adjusting Black and White Video
Adjusts video image from black and white to fully saturated color.
Adjusting the Color Balance
Adjusts red-green color balance in NTSC video images.
Adjusting the Skin Color
Adjusts the color tone of human skin in videos.
Reducing the Temporal Noise
Removes luminance component noise from low light videos.
Reducing the MPEG Noise
Reduces block and mosquito noise in MPEG compressed images.
Setting the Input Levels
Adjusts gain and offset errors for analog signals to correct color.
Adjusting the Color Gain
Corrects color intensity for VGA or component signals.
Adjusting the Color Offset
Corrects color difference degree for VGA signals.
Resetting the Input Levels
Resets all input level parameters to default.
Configuring Picture Settings
Selects suitable picture settings based on display content.
Configuring System Settings
Changing the Language
Selects the display language for the projector.
Adjusting Lens Settings
Adjusts lens type, zoom, focus, and position.
Aligning the Image with Zoom and Focus
Ensures image is parallel and centered with the lens and screen.
Setting Up Power Mode
Setting the Standby Mode
Determines the projector's standby mode when AC power is on.
Configuring Communications
Setting Network Environment
Determines communication settings like network setup and serial port info.
Adjusting LAN Setting
Sets up network configuration for wired networking.
Configuring Date and Time
Setting the Clock Mode
Configures the clock mode, using NTP server or manual setting.
Setting the Date
Configures the date settings.
Setting the Time
Configures the time settings.
Setting the Daylight Saving Time
Configures daylight saving time settings.
Setting the NTP Server
Configures NTP server settings for time synchronization.
Set Event Schedules
Setting the Date and Time Schedule
Checks or adjusts the date and time for scheduled events.
Setting the Schedule Mode
Enables or disables the schedule function.
Configuring Light Source
Setting Light Source
Sets up the light source to control projector brightness.
Setting Constant Power
Manages laser diode power for optimal brightness and lifespan.
Projector Information
Viewing Projector Information
Views projector information about its status and settings.
Changing the Language
Selects the display language for the projector.
Configuring Input Settings
Setting the Main Input Source
Sets the active input to be used as the main image.
Setting the Second Input Source
Selects an active input for picture-in-picture or picture-by-picture.
Enabling the Second Input Source
Activates the picture-in-picture/picture-by-picture function.
Swapping the Main Input and Second Input Source
Switches the main input source with the second input source.
Signal Connectivity Specifications
VGA Video Formats
Identifies video formats supported for the VGA input.
Regulatory
Safety Compliance
Compliance with various international safety standards.
Laser Safety
Compliance with laser product safety regulations.
Electro-Magnetic Compatibility
Compliance with electromagnetic compatibility standards.
Need help?
Do you have a question about the SNP-LU740E and is the answer not in the manual?
Questions and answers