Related Manuals for MIXER PLUS CLASSIC
Summarization of Contents
Regulatory and Operational Information
CE MARKING
Details regarding the CE marking compliance of the machine.
RESERVED RIGHTS
Manufacturer's rights concerning manual reproduction and disclosure.
Initial Setup and Commissioning
FINAL TESTING AND COMMISSIONING
Procedure and requirements for the final testing and commissioning of the machine.
TECHNICAL DATA
Machine Models and Specifications
Details on available models, power supply, and water supply specifications.
Machine Dimensions and Weight
Physical dimensions (height, width, depth) and weight for each machine model.
Handling and Disposal
UNPACKING
Instructions for safely removing the machine from its packaging.
USE DESTINATION
Defines the intended use and application of the mixing pump mixer.
DISPOSAL
Guidelines for the environmentally responsible disposal of the machine and its parts.
Risk Assessment and Mitigation
RESIDUAL RISKS
Identification of residual risks inherent to the machine's operation.
FORESEEABLE INCORRECT USE
Common misuse scenarios and their potential dangers.
Connection Procedures
WATER CONNECTION
Steps for connecting the water supply to the machine.
CONNECTION OF THE MATERIAL CONVEYING TUBE
Instructions for attaching the material conveying tube.
Further Connection Procedures
CONNECTION OF THE AIR TUBE TO THE COMPRESSOR
Steps for connecting the air tube to the compressor.
CONNECTION OF MATERIAL AND AIR TUBES TO SPRAYING NOZZLE
Procedure for connecting air and material tubes to the spraying nozzle.
Operation Procedures
SPRAYING OF THE MATERIAL
Guidance on how to spray the material using the machine.
MACHINE SWITCHING OFF
Steps for safely shutting down the machine after operation.
Maintenance and Winterization
CLEANING OF THE SPRAYING NOZZLE AIR TUBE
Instructions for cleaning the air tube of the spraying nozzle.
WATER DRAINAGE DURING WINTER PERIOD
Procedure for draining water to prevent freezing during winter.
Need help?
Do you have a question about the PLUS CLASSIC and is the answer not in the manual?
Questions and answers