Product Identification; Product Features; Local Codes - Desa Comfort Glow S26NT Owner's Operation And Installation Manual

Desa owner's operation and installation manual vent-free natural gas freestanding pedestal stove system s26nt
Table of Contents

Advertisement

PRODUCT
IDENTIFICATION
Screen
Logs
Heater Controls
(Inside Door)
Figure 1 - Vent-Free Natural Gas Stove

LOCAL CODES

Install and use heater with care. Follow all
local codes. In the absence of local codes, use
the latest edition of The National Fuel Gas
Code, ANS Z223.1, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
This heater is designed for vent-free opera-
tion. State and local codes in some areas
prohibit the use of vent-free heaters.
105683
UNPACKING
1. Remove top inner pack.
2. Tilt carton so that stove is upright.
3. Remove protective side packaging.
4. Slide stove out of carton.
5. Remove protective plastic wrap.
6. Remove screen by lifting and then pull-
ing forward.
7. Remove log set by cutting plastic ties.
8. Carefully unwrap log.
9. Check for any shipping damage. If
stove or log is damaged, promptly in-
form dealer where you bought stove.
3
OWNER'S MANUAL
PRODUCT
FEATURES
SAFETY PILOT
This heater has a pilot with an Oxygen Deple-
tion Sensing (ODS) safety shutoff system.
The ODS/pilot is a required feature for vent-
free room heaters. The ODS/pilot shuts off
the heater if there is not enough fresh air.
PIEZO IGNITION SYSTEM
This heater has a piezo ignitor. This system
requires no matches, batteries, or other
Stove
sources to light heater.
Cabinet
For more information, visit www.desatech.com

Advertisement

Table of Contents
loading

Table of Contents

Save PDF