Advertisement
Available languages
Available languages
Installation
Instructions
WINDOW INSTALLATION--OPTIONAL (cont.)
[_] PREPARE WINDOW
[]
Mark the centerline of the stool. IVleasure from the
[]_] Measure 12_s" from the centerline on both sides
centerline 133/s " on both sides for the panel cuts.
for the sill support brackets.
Centerline
Sill
_
_
_
Outside_4
/
Inside
Stool
Sill
Centerline
Outside
i
12:_" _,_12
Stool
[] INSTALL SILL SUPPORTS
Assemble the sill supports. Do not fully tighten
the spacer mounting screws at this time.
TypeB .....
--e_
_t
Type [___
Spacermounting
Sill s uppo
screwsType(A)
Spacer
Locknut _
t_
Adjusting bolt -----._
Largewasher.---...}_
_)
(for use with wood sills)
i
r_
Before ottoching the sill supports, place them on
the window stool. Select the spacer position that
will place the spacer near the outermost point
on the sill. Tighten the spacer mounting screws.
Screws are in position
Sill support
"V" notch
r_ Turn the bolts and tighten the lock nuts to make
the sill supports level or tilt down 1/8" to the outside.
Line up the "V" notch with 123/s"marks. Drill pilot holes
and attach the sill supports.
Average sill
Narrowsill
--Spacer
Offsetsill(suchas brickor stone)
NOTES:
• On norrow sills, there moy not be enough room to use
the lock nut.
• A deep offset sill moy require o longer odjusting bolt
thon the stondord hex-heod bolt provided.
• On wood sills use the Iorge wosher between the bolt
heod ond the sill. This prevents the bolt from digging
into the wood.
Sill
Bolt
utside
18
Advertisement
