Related Manuals for Bosch BGH96M080B3B
Summarization of Contents
Key to Symbols and Safety Instructions
Key to Symbols
Explains the meaning of symbols used throughout the manual.
Safety
Details critical safety warnings and precautions for installation and operation.
Codes and Standards
Safety
Outlines safety codes and standards relevant to furnace installation.
General Installation
Specifies general requirements for installing the furnace.
Location
General
Provides guidelines for selecting an appropriate installation location for the furnace.
Combustion Air and Vent System
Combustion Air and Vent Safety
Critical safety measures for combustion air and vent system installation.
Combustion Air/Vent Pipe Sizing
Determining the correct pipe sizes for combustion air and vent systems.
Gas Supply and Piping
General
General requirements for gas supply and piping.
Electrical Connections
115V Wiring
Guidance on connecting the 115V power supply to the furnace.
Electrical Connection to J-box
Steps for making electrical connections to the junction box.
24-V Wiring
Instructions for connecting the 24V control wiring.
Grounding
Requirements for properly grounding the furnace.
Thermostat Settings and Wiring
Thermostat Settings
Configuration settings for the thermostat.
Start-Up, Adjustment, and Safety Check
General
Overview of start-up, adjustment, and safety checks.
Start-Up Procedures
Step-by-step procedures for starting up the furnace.
Furnace Start-Up
Detailed sequence for initiating furnace operation.
Safety Circuit Description
Safety Components Overview
Details on various safety circuits and components like limit switches, pressure switches, and flame sensor.
Troubleshooting
Electrostatic Discharge (ESD) Precautions
Precautions to prevent ESD damage to electronic components.
Resetting From Lockout
Procedures for resetting the furnace from a lockout condition.
Troubleshooting Chart
A guide to diagnosing and resolving operational problems.
Service and Maintenance Procedures
Annual Inspection
Routine annual checks for furnace components and operation.
Filters
Guidance on filter selection, maintenance, and replacement.
Induced Draft And Circulating Blower Motors
Information on maintenance for blower motors.
Flame Sensor (Qualified Service Technicians Only)
Service details for the flame sensor.
Need help?
Do you have a question about the BGH96M080B3B and is the answer not in the manual?
Questions and answers