Related Manuals for GAGEMAKER PN-3001
Summarization of Contents
Introduction to Pin Nose Gages
Technical Support Contact Information
Contact phone number and operating hours for technical assistance.
Product Information and Updates
Website address for accessing product details and updates.
PN-3001/2/3 Ext. System Component Details
How to Order PN-3001/2/3 Ext. Series Gages
Steps for selecting and ordering the PN-3001 Ext. Series gage model based on connector size.
PNI-3001/2/3 - VMB Int. System Component Details
How to Order PNI-3001/2/3 - VMB Int. Series Gages
Steps for selecting and ordering the PNI-3001 Ext. Series gage model based on connector size.
PNA-3001/2/3 -VMA Ext. System Component Details
How to Order PNA-3001/2/3 -VMA Ext. Series Gages
Steps for selecting and ordering the PNA-3001 Ext. Series gage model based on connector size.
PN-31VM-30/33VM-30 Int./Ext. System Component Details
How to Order PN-31VM-30/33VM-30 Int./Ext. Series Gages
Steps for selecting and ordering the PN-31/33VM Ext. Series gage model based on connector size.
PN-3001/2/3 JFE Ext. System Component Details
How to Order PN-3001/2/3 JFE Ext. Series Gages
Steps for selecting and ordering the PN-3001 JFE Ext. Series gage model based on connector size.
Setting Standards for Gages
Types of Setting Standards
Covers Box/Pin Frame, Box/Pin Round, and Full Form Flat setting standards.
PNS-3000 Pin Seal Gage Setting Master
Adjustable standard used to preset PN-3000 series pin seal gages.
PNT-3000 Taper Plates for PN-3001/2/3 Gages
Taper plates for PN-3001/2/3 gages, listed by part number and size.
Setup Procedures for PN-3001/2/3 Ext. Gages
Standoff Plates Information
Information on standoff plates available in various thicknesses.
Sweep Gage to Locate Largest Indicator Reading
Procedure to sweep the gage to find the maximum indicator reading.
Setup Procedures for PNI-3001/2/3 Int. Gages
Sweep Gage to Locate Largest Indicator Reading
Procedure to sweep the gage to find the maximum indicator reading.
Setup Procedures for PNA-3001/2/3 Ext. Gages
Sweep Gage to Locate Largest Indicator Reading
Procedure to sweep the gage to find the maximum indicator reading.
Setup Procedures for PN-31VM-30/33VM-30 Int./Ext. Gages
Sweep Gage to Locate Largest Indicator Reading
Procedure to sweep the gage to find the maximum indicator reading.
Setup Procedures for PN-3001/2/3 JFE Ext. Gages
Sweep Gage to Locate Largest Indicator Reading
Procedure to sweep the gage to find the maximum indicator reading.
Care and Maintenance Guidelines
Maintenance Tips for Gages
Guidelines for keeping the gage in good working condition.
Product Warranty Information
Details about the product's warranty coverage, terms, and conditions.
Gage Operation Procedures
Setup and Preload Adjustment
Adjusting blocks for preload and locking the knob.
Zeroing the Indicator
Aligning the indicator bezel to zero with the needle.
Measuring the Connector
Placing gage on connector and sweeping to locate largest reading.
Recording Measurement Deviation
Recording the deviation from zero on the inspection report.
Need help?
Do you have a question about the PN-3001 and is the answer not in the manual?
Questions and answers