Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Desa Manuals
  4. Portable Generator
  5. GENERATOR
  6. Owner's manual

Desa GENERATOR Owner's Manual

Desa owner manual portable gasoline generators
Hide thumbs
1
2
3
4

Advertisement

Quick Links

Download this manual
PORTABLE GASOLINE
GENERATORS
SUPPLEMENTAL INSTRUCTIONS FOR FACTORY INSTALLED
AUTO-IDLE EQUIPPED GENERATORS
10,000 Watt Portable Generators
(See Owner's Manual and Installation Manual for General Operation)
IMPORTANT
Read and understand this manual before operating or servicing
generator. Improper use of generator can cause serious injury.
Keep this manual for future reference.

Advertisement

loading
Need help?

Need help?

Do you have a question about the GENERATOR and is the answer not in the manual?

Questions and answers

Related Manuals for Desa GENERATOR

Summary of Contents for Desa GENERATOR

  • Page 1 AUTO-IDLE EQUIPPED GENERATORS 10,000 Watt Portable Generators (See Owner's Manual and Installation Manual for General Operation) IMPORTANT Read and understand this manual before operating or servicing generator. Improper use of generator can cause serious injury. Keep this manual for future reference.

  • Page 2: Stopping Engine

    • Use only factory-approved replacement parts. PRESTART Operate generator on a firm, dry, and clean surface. The surface must be level. Protect generator from heavy dust, sand, dirt, rain, or snow. Do not locate generator near standing water and snow. Make sure area is well-vented.
  • Page 3 WARNING: Guard against burns. Hot muffler, exhaust manifold, and engine parts can cause severe injury. Use caution and remain alert when adjusting or using generator. Hold plunger in solenoid body to manually engage solenoid and set idle speed. WARNING: Always set the idle speed before turning on the Auto-Idle.
  • Page 4 Auto-Idle Control Board Circuit Breaker White White Auto-Idle Solenoid Yellow Circuit Breaker Yellow Capacitor Rated Stator Main Stator Auxiliary Winding ∆ Watts Winding * 10,000 * Connect T2 and T3. Measure resistance between T1 and T4. ∆ Disconnect capacitor leads in order to read auxillary winding resistance. †...