Download Print this page

Advertisement

Quick Links

JRC SAW FILTER
Application
320.65MHz R.K.E.
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Item
Input and Output Impedance
Nominal Center Frequency (f0)
Insertion Loss
Response Variation
Input and Output VSWR
Out of Band Rejection
(Relative to Through Level)
Maximum Rating: (Table 2)
Table 2. Maximum Ratings
Item
Maximum Input Power
Maximum DC Voltage
Operating Temperature Range
Storage Temperature
Mechanical Specifications: (Fig.2)
Package is designed as small as 3.5x3.5x1.0[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
Communications Equipment Marketing Department
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/saw/index.html (English)
NSVS682
320.15~321.15MHz
320.15~321.15MHz
320.15~321.15MHz
299.25MHz
342.05MHz
Rating
+20dBm
7.5V
-20~+70ºC
-30~+80ºC
Communications Equipment Division
10-1,Nishi-Shinjuku 6-chome,Shinjuku-ku,
Tokyo. 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
Spec.
50Ω
320.65MHz
3.0dB max.
1.5dB max.
2.5 max.
50dB min.
45dB min.
(Operating Temperature Range: -20~+70ºC)
3
] for SMD (Surface Mount Device) type.
NSVS682 Jan. 2005
Typ.
-
1.6dB
0.5dB
1.7
68dB
51dB

Advertisement

loading

Summary of Contents for JRC NSVS682

  • Page 1 NSVS682 Jan. 2005 JRC SAW FILTER NSVS682 Application 320.65MHz R.K.E. Electrical Specification: (Table 1) The device characteristics are measured in the circuit shown in Fig.1. Table 1. Electrical Specifications Item Spec. Typ. − Input and Output Impedance 50Ω Nominal Center Frequency (f0) 320.65MHz...
  • Page 2 NSVS682 Jan. 2005 50Ω 50Ω Fig.1 Measuring circuit 3.5±0.2 Marking (1) Manufacture’s Mark (2) Lot Number (a) Year (b) Month (0.95) (0.8) [5x] *Oct.--- X Nov.--- Y Dec.--- Z (0.6) (3) Part number Mark Pin no. Connection IN/OUT OUT/IN Fig.2 Package dimensions (in mm) [6x] Φ...
  • Page 3 NSVS682 Jan. 2005 Notice 1. Use this component within operating temperature range. It might not be satisfied with electrical specification without operating temperature range. When it is used less than -20ºC or more than +70ºC, it might be a cause of degradation or destruction of the component.
  • Page 4 NSVS682 Jan. 2005 ‚ ‚ ‚ 50 O *27nH ‚ U 39pF 50 O *27nH ‚ T ‚ ‚ ‚ ‚ 33pF FREQUENCY CHARACTERISTICS *murata LQW18A series Fig.1 Measuring circuit 13.30±0.20 (1.26±0.13) J4Y1 VS971 CH1 : center 320.65 span 100 CH2 : center 320.65 span 100...