JRC NSVS1234 Manual

JRC SAW FILTER
Application
174MHz (BW=22MHz) for GPS-IF
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Parameter
Input and Output Impedance
Nominal Center Frequency (f0)
Insertion Loss
Passband Ripple
Group Delay Variation
Out of Band Rejection
(Relative to minimum Insertion Loss)
Maximum Rating: (Table 2)
Table 2. Maximum Ratings
Parameter
Maximum Input Power
Maximum DC Voltage
Operating Temperature Range
Storage Temperature
Mechanical Specification: (Fig.2)
Package is designed as small as 5.2x4.5x1.5[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
Communications Equipment Marketing Department
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/saw/index.html(English)
NSVS1234
163~185MHz
124~154MHz
194~224MHz
(Operating Temperature Range: -40~+85ºC)
Communications Equipment Division
10-1, Nishi-Shinjuku 6-chome, Shinjuku-ku,
Tokyo, 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
Spec.
-
- 174MHz
12.0dB max.
1.5dB max.
100ns max.
30dB min.
18dB min.
Rating
+10dBm
7.5V
-40~+85ºC
-40~+85ºC
3
] for SMD (Surface Mount Device) type.
NSVS1234 Oct. 2008
Typ.
50Ω
10.8dB
0.9dB
40ns
38dB
28dB