JRC NSVS1120 Manual

JRC SAW FILTER
Application
570MHz WLAN IF
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Item
Input and Output Impedance
Nominal Center Frequency (f0)
Insertion Loss
Response Variation
Input and Output VSWR
Group Delay Ripple
Out of Band Rejection
(Relative to
Through Level)
Maximum Rating: (Table 2)
Table2. Maximum Ratings
Item
Maximum Input Power
Maximum DC Voltage
Operating Temperature Range
Storage Temperature
Mechanical Specifications: (Fig.2)
Package is designed as small as 3.0x3.0x1.15[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
Communications Equipment Marketing Department
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/saw/index.html (English)
NSVS1120
561.5~578.5MHz
561.5~578.5MHz
561.5~578.5MHz
561.5~578.5MHz
370~548MHz
553MHz
555MHz
585MHz
587MHz
592~770MHz
(Operating Temperature Range : -20~+60ºC)
Rating
+10dBm
7.5V
-20~+60ºC
-30~+80ºC
Communications Equipment Division
10-1, Nishi-Shinjuku 6-chome, Shinjuku-ku,
Tokyo, 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
Spec.
-
- 570MHz
4.7dB max.
2.5dB max.
3.0 max.
50nsec max. 20nsec
30dB min.
7dB min.
5dB min.
5dB min.
7dB min.
30dB min.
3
] for SMD (Surface Mount Device) type.
NSVS1120 Oct. 2004
Typ.
50Ω
3.8dB
1.7dB
2.5
37dB
10dB
7dB
7dB
10dB
35dB