Related Manuals for Yamaha WaveRunner VXR 2012
Summarization of Contents
Important Manual Information
Declaration of Conformity
Details the PWC's compliance with European directives.
General and Important Labels
Identification Numbers
Records PRI-ID, CIN, and engine serial numbers for parts and theft.
Important Labels Overview
Guides on reading various labels on the watercraft for safe operation.
Warning Labels
Highlights critical safety warnings related to operation and potential hazards.
Other Important Labels
Covers additional labels such as fire extinguisher compartment and capacity markings.
Safety Information
Operator Age and Load Limitations
Specifies minimum operator age, supervision, and maximum load capacity.
Cruising Limitations and Safe Practices
Details safe operating speeds, distances, and environmental conditions.
Operation Requirements
Outlines mandatory safety gear like PFDs and protective clothing.
Recommended Safety Equipment
Lists essential safety items to carry on board for emergencies.
Hazard Information
Warns about exhaust fumes, hot engine parts, and other operational dangers.
Watercraft Operational Characteristics
Explains jet thrust, steering, and reverse system operation.
Water-Skiing Safety Guidelines
Provides safety considerations and requirements for towing skiers.
Safe Boating Rules
Emphasizes adherence to navigation rules and waterway regulations.
Responsible Watercraft Enjoyment
Promotes courteous operation and environmental care for shared waterways.
Description
Watercraft Glossary
Defines key terms related to watercraft operation and components.
Location of Main Components
Identifies and illustrates the location of major external and internal parts.
Engine Compartment Components
Details the components found within the engine compartment for maintenance.
Control Function Operation
Remote Control Transmitter Operation
Explains the function and use of the remote control for security and modes.
Yamaha Security System
Describes how to lock/unlock the watercraft and prevent unauthorized use.
Engine Stop Switch
Details the function of the red stop button for immediate engine shutdown.
Engine Shut-off Switch and Lanyard
Explains the safety lanyard system that stops the engine if the operator falls.
Start Switch Operation
Guides on how to start the engine using the green start button.
Throttle Lever Operation
Explains how to control engine speed and thrust using the throttle lever.
Steering System Guide
Describes how handlebars control direction via the jet thrust nozzle.
Cooling Water Pilot Outlet
Explains how to check engine cooling system operation via water discharge.
Water Separator Function
Details the water separator's role in collecting water from the fuel system.
Watercraft Operation
Reverse System Operation
Explains how to engage and use the reverse function safely.
Watercraft Operation Modes
Details the Low RPM Mode for controlled operation.
Instrument Operation
Multifunction Information Center
Overview of the display panel showing various operational data.
Information Display Functions
Describes the individual indicators and readings on the information display.
Speedometer Operation
Explains how to read and change units for the watercraft speed.
Tachometer Guide
Details how to read engine speed in RPM.
Hour Meter and Voltmeter
Explains functions for tracking engine hours and battery voltage.
Fuel Level Meter and Warning
How to monitor fuel levels and understand fuel warnings.
Oil Pressure Warning Indicator
Explains the indicator and actions for low oil pressure.
Engine Overheat Warning Indicator
Details the warning for engine temperature and troubleshooting steps.
Check Engine Warning Indicator
Explains the warning for sensor malfunctions or electrical issues.
Equipment Operation
Seat Removal and Installation
Instructions on how to remove and reinstall the watercraft seat.
Handgrip Usage and Safety
Describes the use of handgrips for boarding and stability, with safety warnings.
Reboarding Step (VXR)
Details the operation and safety precautions for the VXR reboarding step.
Bow Eye Function
Explains the purpose of the bow eye for towing and mooring.
Stern Eyes Usage
Describes the use of stern eyes for securing the watercraft.
Cleat Function
Explains the cleat's use for attaching ski ropes.
Storage Compartments Overview
Information on the watercraft's storage areas, including capacity and limitations.
Bow Storage Compartment Details
Specifics on opening, draining, and capacity of the bow storage.
Glove Compartment Details
Instructions for opening, closing, and capacity of the glove compartment.
Beverage Holder (VXR)
Location and usage notes for the beverage holder.
Fire Extinguisher Holder and Cover
Instructions for accessing and securing the fire extinguisher.
Operation and Handling Requirements
Fuel Requirements and Refueling
Specifies recommended fuel types, octane ratings, and refueling safety.
Engine Oil Requirements and Checks
Details recommended engine oil types, grades, and checking procedures.
Draining Bilge Water
Instructions for draining bilge water on land and on water.
Transporting on a Trailer
Guidelines for securing the watercraft to a trailer for transport.
First-Time Operation
Engine Break-in Procedure
Essential steps for breaking in the engine for optimal performance and longevity.
Pre-Operation Checks
Pre-Operation Checklist
Comprehensive checklist of pre-launch and post-launch checks for safety.
Pre-launch Checks (On Land)
Detailed checks to perform before launching the watercraft.
Cooling Water Pilot Outlet Check
Verifies proper engine cooling system function by checking water discharge.
Engine Idling Speed Check
Ensures the engine's idling speed is within the specified range.
Battery Checks and Maintenance
Covers inspection of battery terminals, leads, and electrolyte level.
Steering System Checks
Verifies smooth operation and proper free play of the steering system.
Reverse System Checks
Ensures smooth operation of the shift lever and reverse gate.
Throttle Lever Checks
Checks for smooth operation and proper free play of the throttle lever.
Switch Checks
Verifies proper operation of start, stop, and shut-off switches.
Jet Intake Checks
Ensures the jet intake is not damaged or clogged with debris.
Operation
Operating Your Watercraft Safely
General guidance on becoming familiar with controls and safe operation.
Getting to Know Your Watercraft
Encourages learning basic techniques and reading manuals for safe enjoyment.
Learning to Operate Your Watercraft
Emphasizes pre-operation checks and checking local laws before riding.
Riding Position Guidelines
Describes correct operator and passenger riding positions for stability.
Launching the Watercraft
Safety precautions to take when launching from a trailer or shore.
Starting the Engine on Water
Step-by-step guide on starting the engine in the water, including security system use.
Stopping the Engine
How to safely stop the engine using the stop switch.
Turning the Watercraft
Explains how throttle and handlebar input affect turning.
Stopping the Watercraft
Details the process of stopping the watercraft and required stopping distance.
Operating the Watercraft in Reverse
Instructions for using the reverse system for maneuvering.
Boarding the Watercraft Safely
Safety advice and steps for boarding from water, dock, or trailer.
Capsized Watercraft Procedures
Steps to safely upright a capsized watercraft.
Beaching and Docking
Guidelines for safely approaching and securing the watercraft to a beach or dock.
Care and Storage
Post-Operation Care
Essential steps to take after operating the watercraft.
Flushing Cooling Water Passages
Procedure to flush salt, sand, or dirt from cooling system passages.
Cleaning the Watercraft
Instructions for cleaning the hull, deck, and engine compartment.
Battery Care and Storage
Guidelines for battery maintenance, charging, and storage.
Long-Term Storage Procedures
Steps for preparing the watercraft for extended storage periods.
Lubrication of Cables and Parts
Details on lubricating throttle, steering, and shift cables.
Rustproofing Recommendations
Guidance on applying rust inhibitors to protect metallic parts.
Maintenance
Periodic Maintenance Overview
Importance of periodic checks and lubrication for safety and efficiency.
Tool Kit Contents
Lists the tools included with the watercraft for basic maintenance.
Engine Cover Removal and Installation
Step-by-step instructions for accessing the engine by removing the cover.
Periodic Maintenance Chart
Schedule of recommended maintenance tasks and intervals.
Engine Oil and Oil Filter Maintenance
Guidance on changing engine oil and the oil filter.
Specifications
Watercraft Specifications
Technical data including capacity, dimensions, performance, and engine details.
Trouble Recovery
Troubleshooting Guide
Provides common problems, causes, remedies, and corresponding page numbers.
Emergency Procedures
Steps to take in case of emergencies like a clogged jet intake.
Cleaning the Jet Intake and Impeller
Instructions for clearing weeds or debris from the jet intake and impeller.
Jumping the Battery
Instructions for starting the engine using a booster battery and jumper cables.
Replacing the Fuses
Guide on identifying and replacing blown fuses in the electrical system.
Towing the Watercraft Safely
Safety precautions and procedures for towing an inoperative watercraft.
Submerged Watercraft Procedures
Steps to take if the watercraft becomes submerged or flooded.
Need help?
Do you have a question about the WaveRunner VXR 2012 and is the answer not in the manual?
Questions and answers