Related Manuals for Scotsman Enodis CME506AS-1H
Summarization of Contents
Introduction to the AutolQ Cubers
Manual Overview
Describes the manual's structure from specifications to service and repair.
Model Coverage
Lists the specific CME models (256, 506, 656, 806) covered by this manual.
Specifications
Operational Limits
Details the minimum and maximum environmental and utility limits for the ice machines.
Basic Information Table
Provides key data like dimensions, electrical specs, and fuse sizes for each model.
Pre-Installation Procedures
Other Applications & Dispenser Compatibility
Discusses using models with ice dispensers and general application advice.
Nameplate and Water Information
Locates the nameplate and explains water purity, filtration, and quality importance.
Location & Assembly
Clearance and Airflow Requirements
Specifies minimum clearances for air-cooled models and air circulation.
Cabinet Panel Removal & Unpacking
Guides on removing panels and unpacking the ice bin and machine.
Plumbing Connections
Water Supply and Drain Specs
Defines tubing sizes for potable water supply and gravity drain connections.
Water-Cooled Model Plumbing
Details specific water inlet and condenser drain connections for water-cooled units.
Electrical Installation
Electrical Connections and Requirements
Explains how to make electrical connections, referencing the nameplate for specs.
Post-Installation Checks
Final Check List
A comprehensive checklist to verify all installation steps and utility connections are complete.
Initial Start Up Procedure
Step-by-Step Start Up
Guides through powering on, reservoir fill, and initiating the first freeze cycle.
Cycle Operation and Notes
Explains freeze/harvest cycles, pump function, and operational notes like bin full.
Adjustments and Troubleshooting
Initial Start Up Error Handling
Addresses common water or refrigeration errors during the initial start-up.
Adjusting Water Purge Levels
Details the process for modifying water purge settings via the AutoIQ Controller.
AutolQ Controller Operation
Controller Buttons and Indicators
Explains the functions of push buttons and the meaning of indicator lights.
Machine Reset and Diagnostics
Provides instructions for resetting the machine and retrieving diagnostic codes.
Sanitation and Cleaning
Ice Machine Water System Cleaning
Step-by-step guide for cleaning and sanitizing the internal water system.
Cleaning Solution Preparation
Details mixing instructions for cleaning and sanitizing solutions, including safety.
Additional Maintenance Tasks
Sanitizing the Ice Storage Bin
Instructions for cleaning and sanitizing the ice storage bin, its door, and gaskets.
Water Distributor Maintenance
Guidance on cleaning water distributors to prevent mineral build-up.
Component Maintenance
Cleaning Bin Control Sensors
Instructions for cleaning the infrared sensors to ensure proper ice level detection.
Air Filter and Condenser Care
Information on air filter replacement and cleaning the air-cooled condenser coil.
Service and Troubleshooting
Pre-Service Troubleshooting Checks
Lists critical checks to perform before calling for service to resolve issues.
Machine Reset and Shutdown
Provides procedures for manually resetting the machine and safely shutting it down.
Need help?
Do you have a question about the Enodis CME506AS-1H and is the answer not in the manual?
Questions and answers