Table of Contents
Advertisement
Chain Saw
Instruction Manual
MODELS :
Read rules for safe operation and instructions carefully. ECHO provides an Instruction
Manual and a Safety Manual. Both must be read and understood for proper and safe
operation.
X7503202004
CS-3000 TYPE 1E
Serial Number 4034 & Up
CS-3400 TYPE 1E
Serial Number 3942 & Up
CS-3450 TYPE 1E
Serial Number 5120 & Up
WARNING
DANGER
89865039234
09/01
Advertisement
Table of Contents
Related Manuals for Echo CS-3450
Summarization of Contents
Rules for Safe Operation
Kickback Safety Precautions
Details precautions to prevent kickback accidents, emphasizing proper grip and awareness.
Other Safety Precautions
Covers general safety practices like PPE, fueling, and work area safety.
Technical Data
Model Specifications
Provides technical specifications like dimensions, weight, engine type, displacement, fuel, and oil.
Nomenclature of Parts
CS-3000/CS-3400 Parts Identification
Illustrates and lists major components for CS-3000 and CS-3400 models.
CS-3450 Parts Identification
Illustrates and lists major components for the CS-3450 model.
Preparation for Use
Guide Bar and Chain Installation
Step-by-step guide for attaching the guide bar and saw chain to the power head.
Chain Tension Adjustment
Instructions on how to properly set and adjust the saw chain tension.
Fuel and Lubricant
Fueling and Mixing Instructions
Details on recommended gasoline and two-stroke oil, including mixing ratios and storage.
Chain Lubrication
Information on the type of oil for bar and chain, and when to refill.
Operation
Starting Cold and Difficult Engines
Procedure for starting the engine when cold or if it's hard to start.
Operation (Continued)
Starting Warm Engine and Stopping
Steps for starting a warm engine and how to safely stop the saw.
Cutting Instructions
General Cutting Techniques
Basic principles for holding and operating the saw during cutting.
Kickback Prevention
Explanation of kickback and how to avoid it through proper technique.
Felling a Tree
Tree Felling Procedure
Detailed steps for safely felling a tree, including notch cutting and hinge formation.
Limbing Fallen Trees
Techniques and safety precautions for removing branches from a fallen tree.
Bucking
Log Cutting Techniques
Basic rules and techniques for cutting logs into smaller pieces.
Kickback Dangers
Further explanation of kickback causes and the importance of safety precautions.
Kickback Safety Features
Recommended Kickback Reduction Features
Features to reduce kickback, like specific guide bars and low kick chains.
Maintenance and Care
Filter, Oiler, and Strainer Maintenance
Procedures for cleaning air filter, automatic oiler, and fuel/oil strainers.
Guide Bar and Sprocket Care
Instructions for cleaning, oiling, and inspecting guide bar and sprocket.
Maintenance and Adjustments
Spark Plug Maintenance
Details on checking, gapping, and replacing the spark plug.
Cooling System Cleaning
Steps to clean dirt from cylinder fins and ignition coil areas.
Carburetor Adjustment Basics
Information on engine break-in and altitude adjustments.
Carburetor Adjustment Procedures
High/Low Speed Needle Adjustment
Detailed steps for adjusting high and low speed needles for optimal performance.
Idle Speed Adjustment
Procedure for setting the engine idle speed correctly.
Chain and Guide Bar Combinations
Compatible Guide Bar and Chain Models
Lists compatible guide bar and saw chain models for different saw models.
Setting the Saw Chain
Chain Sharpening and Depth Gauge Filing
Instructions on sharpening saw chain cutters and adjusting the depth gauge.
Chain and Guide Bar Combinations (Continued)
Properly Filed Cutter Shapes
Illustrations showing correct angles for filing saw chain cutters.
Chain Type and Sprocket Pitch
Identifying Chain and Sprocket Compatibility
Guidance on identifying correct chain type and sprocket pitch for compatibility.
Troubleshooting
Engine Starting Problems
Diagnostic guide for issues with engine not starting or being difficult to start.
Engine Running Problems
Diagnostic guide for issues where the engine does not keep running or has performance defects.
Troubleshooting (Continued)
Output and Chain Performance Issues
Diagnostic guide for engine overheating, insufficient output, or chain not cutting clean.
Storage After Use
Proper Storage Procedures
Steps for cleaning, oiling, draining fuel, and storing the chain saw.
Correct Use of Chain Brake
Chain Brake Function and Operation
Explanation of the chain brake's function, engagement, and safety role.
Chain Brake Testing and Installation
Instructions for testing chain brake functionality and recommendations for installation.
Servicing Information
Parts and Service Availability
Information on obtaining genuine ECHO parts and authorized service for the product.
Consumer Support and Warranty
Contact information for product support and details regarding the warranty card.
Need help?
Do you have a question about the CS-3450 and is the answer not in the manual?
Questions and answers