Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR
550W 230V 457mm
Digital Compact Wood Lathe
Stock No.60989
Part No.WTL457
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy
of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Related Manuals for Draper 60989
Summarization of Contents
GENERAL INFORMATION
Product Manual Overview
Provides an overview of the product manual's purpose, scope, and importance for safe use.
TITLE PAGE
User Manual Introduction
Identifies the product and manual, including stock and part numbers.
Manual Revisions
Lists the date of the first published version of the user manual.
Safety Content Interpretation
Explains the meaning of warning and caution symbols used in the manual.
Copyright and Usage Rights
Details the copyright holder and permitted uses of the manual's content.
GUARANTEE
Product Guarantee Terms
Outlines the warranty period, coverage, and conditions for Draper tools.
INTRODUCTION
Machine Scope Definition
Specifies the intended applications for the wood lathe, defining mis-use.
Product Specifications
Lists detailed technical data of the wood lathe, including dimensions and electrical ratings.
Handling and Storage Guidelines
Provides advice on environmental factors and care for optimal machine performance.
HEALTH & SAFETY INFORMATION
General Power Tool Safety Instructions
Presents fundamental safety practices for users of power tools to prevent injury.
Power Supply Connection
Details requirements and precautions for connecting the wood lathe to the electrical power supply.
TECHNICAL DESCRIPTION
Component Identification
Identifies and labels the various parts of the wood lathe using a diagram.
UNPACKING & CHECKING
Packaging Inspection
Instructs on carefully examining the product and packaging for shipping damage.
Contents Verification
Guides users to check all included parts against the list provided in the manual.
PREPARING THE WOOD LATHE
Drive Spur Installation
Explains the procedure for fitting the drive spur into the headstock and tailstock spindles.
Face Plate Attachment
Details how to securely screw the face plate onto the headstock spindle.
SETTING THE WOOD LATHE
Adjusting Spindle Speed
Describes how to change the lathe's speed using the variable speed dial while it is running.
Moving the Tailstock
Explains how to slide and lock the tailstock along the bed and adjust the spur.
Positioning the Tool Rest
Details how to adjust the tool rest's position along the bed and its height/angle.
BASIC WOOD TURNING
Spindle Turning Procedure
Guides the user through the initial steps of spindle turning, including workpiece preparation and tool rest setup.
Woodworking Chisel Types
Introduces the six common types of woodturning chisels and their characteristics.
Theory of Turning Actions
Differentiates between cutting and scraping actions and the chisels used for each.
Cutting vs. Scraping Techniques
Explains when to use cutting or scraping based on workpiece orientation and grain direction.
Tool Rest for Circumference Cutting
Details correct and incorrect positioning of the tool rest for circumference turning to prevent chatter or kickback.
Tool Rest for Circumference Scraping
Advises on tool rest positioning for circumference scraping, noting it's less critical than for cutting.
Tool Rest for Diameter Scraping
Explains correct positioning for diameter scraping, emphasizing the left side of the centre.
Using the Gouge Chisel
Describes the typical uses and handling of a gouge chisel for rough turning and shaping.
Using the Skew Chisel
Details the applications and techniques for using a skew chisel for fine finishing cuts.
Using the Parting Chisel
Explains the use of a parting chisel for cutting grooves and separating pieces.
Using Scraping Chisels
Introduces spear point, round nose, and flat nose chisels for scraping operations.
TROUBLESHOOTING
Common Problems and Solutions
Lists common issues like motor failure or loose headstock with probable causes and suggested remedies.
MAINTENANCE
Routine Maintenance Procedures
Covers essential maintenance tasks such as checking oil levels, cleaning, and blade brush adjustment.
EXPLANATION OF SYMBOLS
Safety and Warning Symbols
Illustrates and explains various warning symbols related to safety, PPE, and WEEE disposal.
DISPOSAL
Product Disposal Guidelines
Provides instructions on how to dispose of the product responsibly at the end of its life.
Need help?
Do you have a question about the 60989 and is the answer not in the manual?
Questions and answers