Related Manuals for Sharp 1860L
Summarization of Contents
Preface
Important Precautions
Key safety and operational precautions for using the lathe.
Machine Installation
Unpacking, Lifting, and Foundation
Steps for unpacking, lifting, and preparing the machine's foundation.
Cleaning and Leveling
Procedures for cleaning the machine and ensuring proper leveling.
Electrical System
Electrical Controls and Safety
Overview of electrical wiring, equipment, and essential safety cautions.
Operation Procedures
Operation Symbols
Explanation of operation symbols and their meanings.
Spindle Operations
Covers spindle transmission, speed selection, and intermittent operation.
Gearbox and Feed Control
Details gearbox control, manual and automatic feeding, and stop functions.
Tailstock Operation
Instructions for operating the tailstock and its adjustments.
Threading
Threading Basics and Dial Indicator
Covers leadscrew drive, threading steps, and dial indicator usage.
Threading Charts
Reference charts for thread and feed settings for various pitches.
Lubrication
Lubrication Procedures and Charts
Covers headstock, gearbox, apron lubrication, charts, and locations.
Maintenance & Adjustment
Component Maintenance
Maintenance for headstock, apron, saddle, and gear box.
Drive System Adjustments
Covers adjustments for belts, brakes, and leadscrew backlash.
Tailstock and Coolant Maintenance
Covers tailstock center line adjustment and coolant system repair.
Taper Attachment Installation
Installation Guide
Step-by-step guide for installing the taper attachment.
Troubleshooting
Noise, Chatter, and Vibration
Diagnosing and resolving noise, chatter, and vibration problems.
Threading and Coolant Issues
Common threading issues and coolant pump troubleshooting.
Adjustments and Repairs
Key Component Adjustments
Procedures for leadscrew backlash, spindle bearings, feed overload, and half nuts.
Need help?
Do you have a question about the 1860L and is the answer not in the manual?
Questions and answers