Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for unicraft RFW 1
Summarization of Contents
Imprint
Product identification
Lists product models and their item numbers.
Manufacturer
Provides manufacturer's name and contact details.
Indications regarding the operating instructions
Notes regarding the original operating instructions, language, and author.
Indications regarding the copyright
States copyright ownership and usage restrictions.
Introduction
Copyright
Details copyright protection and usage rights for the document.
Customer service
Information on how to contact customer service for support and technical queries.
Disclaimer
Manufacturer's liability limitations and scope of delivery deviations.
Safety
Legend of symbols
Explains symbols used in safety instructions to indicate risk levels.
Obligations of the operating company
Outlines the responsibilities of the company operating the roller driver.
Requirements to staff
Details the necessary qualifications and training for personnel using the equipment.
Personal protective equipment
Specifies the required PPE for safe operation and maintenance of the roller driver.
General safety regulations
Lists general safety rules, applicable standards, and prohibited actions.
Safety information for operating personnel
Provides safety guidelines for personnel operating the roller driver.
Safety labels
Describes the safety signs affixed to the roller driver and their importance.
Checks
Outlines periodic inspections and checks required for the equipment.
Intended Use
Foreseeable misuse
Discusses potential misuse scenarios and their implications.
Residual risks
Identifies inherent risks that remain even with safety precautions observed.
Technical Data
Type plate
Information found on the machine's type plate, including model and specifications.
Description of device
Image
Illustration of the roller driver components with labels.
Scope of delivery
Lists the items included in the product package.
Mounting
Personal protective equipment for mounting
Details PPE required before and during the mounting process.
Check parts for wear or damage
Step 1: Inspect all components for any signs of damage or wear.
Measure steel beam width
Step 2: Measure the width of the steel beam to be used.
Screw threaded rod into side panels
Step 3: Attach the threaded rod to the side panels.
Adjust guide rollers to beam width
Step 4: Position guide rollers based on beam width, maintaining clearance.
Place roller driver on carrier
Step 5: Mount the roller driver onto the beam and check for smooth movement.
Mount travel limits
Step 6: Install travel limiters to prevent the roller driver from moving off the beam.
Care, maintenance and repair
Care by cleaning
Instructions for cleaning the roller driver to maintain its condition.
Maintenance and repair
Guidelines for performing maintenance and repairs, including a maintenance plan.
Inspecting the roller driver
Inspection regulations
Details legal requirements and expert inspections for initial commissioning and periodic checks.
Wear measurement and replacement of guide rollers
Procedures and limit values for measuring guide roller wear and replacement criteria.
Disposal, reusing used machines
Decommissioning
Steps for safely decommissioning and preparing the machine for disposal.
Disposing of lubricants
Guidance on the proper disposal methods for lubricants used with the machine.
Spare parts
Spare parts orders
Information on how to order spare parts, including required data.
Spare parts drawing
Visual guide to identify spare parts using a numbered drawing.
Need help?
Do you have a question about the RFW 1 and is the answer not in the manual?
Questions and answers