Access Control Panel - Continental Access CARDACCESS 3000 - ARCHITECTURAL AND ENGINEERING SPECIFICATION V2.7 Specification

3. Workstations
4. Card Readers
5. I/O points
6. Alarm Panels
7. Access Levels
8. Time Zones
9. Communications Servers
10. Dynamic Maps
11. System Operators
1.8. ACCESS CONTROL PANELS
A. The Access Control System (ACS) panels shall support, through firmware updates, full
system integration, providing full system integration to standard burglary Alarm Panels
with 32, 96, and 255 Zone Control. This shall allow reporting to Police, Fire Department,
and to the ACS.
B. The following latest panels shall be available:
1. Two 2 Door Intelligent Reader Control Panel
2. Four Door Intelligent Reader Control Panel
3. Eight Door Intelligent Reader Control Panel
4. Expansion Modules:
i.
ii.
iii. The ACS I/O Board shall support up to 3 expansion boards, each
C. Additional Devices:
The ACS Access Panels shall support the following Add-On devices:
1. Personnel Identification Devices, including, but not limited to:
i. Prox-Cards
ii.
iii.
iv.
v.
vi.
vii.
viii. Barcode
ARCHITECTURAL AND ENGINEERING SPECIFICATION, v 2.7
The ACS panels shall provide for full Supervised Alarm Input Expansion
Modules (16 Supervised Alarm Inputs).
The ACS panels shall support Relay Control Expansion Module (16 Form
C Relay Outputs, and 8 Non-Supervised Inputs).
provides 16 Supervised Inputs and 16 Relay Outputs, for a total of 48
each.
Smart-Cards,
Key Fobs,
CHUID card
CAC card
TWIC
FIPS 201-1 card
7