Related Manuals for Gecko ES Series
Summarization of Contents
Introduction
Series Configurations
Details different heater configurations like U, US, VH, and LH series.
Important Safety Instructions
General Safety and Hyperthermia Risks
Covers child safety, hyperthermia risks, and safe water temperatures.
Electrical Shock Prevention Measures
Explains grounding, bonding, and electrical hazards near water.
Electrical Installation
GFCI, Bonding, and NEC Requirements
Details NEC compliance, GFCI use, and grounding connections.
GFCI Installation Options
Illustrates Option 1 (Main Panel) and Option 2 (Subpanel) GFCI setups.
Plug Connection and Wiring Diagrams
Covers 15A/20A plug connections and detailed GFCI wiring.
Heater Installation
U/US Series Heater Mounting
Steps for installing fixed and slide heaters, including relocation.
Versi-Heat Heater Installation Guide
Guidelines for Versi-Heat heaters, noting horizontal placement and flow rate.
Power Connection
240V Wiring Configurations
Details wiring for 240V convertible (4-wire) and 240V only (3-wire).
120V Wiring Configuration Details
Illustrates 120V wiring and notes reduced output for heaters.
Circuit Board Configurations
Voltage Conversion and Jumper Settings
Explains converting from 120V to 240V using jumper settings.
Pump and Accessory Cord Wiring
Details wiring for 2-speed and single-speed pumps/accessories.
Wi-Fi Module Installation
Module Connection Steps
Instructions for connecting the Wi-Fi transmitter and receiver modules.
Wi-Fi Status Indicator Guide
Explains the LED status lights for pairing and connectivity.
Spaside Control Installation
Mounting and Cut-Out Dimensions
Details cut-out dimensions and mounting location requirements for the spaside control.
Spaside Physical Installation Steps
Provides a step-by-step guide for physically installing the spaside control.
Spaside Functions and Features
Pump, Blower, and Light Controls
Explains operation of Pump 1, Pump 2, Blower, and Light keys.
Temperature Adjustment and Indicators
Describes how to adjust temperature and interpret indicators.
Programming Options
Power Key and Filter Menu Access
Details access to Economy Mode and the main programming menu.
Setting Clock and Filter Cycle
Instructions for setting the time and configuring filter cycles.
Filter Frequency and Economy Settings
How to set filter cycle frequency and economy mode parameters.
Economy Start/Duration and Temp Readout
Setting economy start/duration times and changing temperature units.
Power Up and Breaker Settings
Boot-up Sequence and GFCI Rating
Describes system boot-up and setting the GFCI breaker rating.
Low-Level Program Configuration
Steps to re-enter and set low-level program configurations.
Smart Winter Mode
Winter Protection Operation
Explains system protection against freezing by cycling pumps.
Spaside Messages and Errors
Common Error Code Explanations
Lists and explains common error codes like Hr, Prr, OH, HL, FLO, FLC.
Additional Error Messages
Explains UPL and AOX error messages.
System Plug Pinouts
Pump and Accessory Wiring
Details pinouts for various system plugs like pumps, blower, and ozone.
Operation Considerations
Warm Weather Operation
Explains pump shutdown due to high compartment temperature in warm weather.
Filtration and Winterizing Guidance
Refers to filtration manual and advises contacting dealer for winterizing.
Chemical Water Treatment Best Practices
Discusses water balancing, sanitizing, and avoiding softened water.
Troubleshooting
System Power and Water Flow Issues
Solutions for no power and problems with water flow.
Pump, Jet, and Blower Malfunctions
Troubleshooting for pumps, jets, and blower not working.
Therapy Jet and Water Leak Issues
Solutions for therapy jets not operating and water leaks.
Heat, Light, and GFCI Breaker Issues
Addresses heat, light problems, and GFCI breaker trips.
System Data Label
Label Location and Importance
Explains the location and necessity of the system data label for service.
Warranty Information
Warranty Terms and Exclusions
Details the product warranty period, exclusions, and claim process.
Need help?
Do you have a question about the ES Series and is the answer not in the manual?
Questions and answers