Related Manuals for Baxi Heat 430
Summarization of Contents
Introduction
General
Provides general information about the boiler and its intended use.
Symbols Used
Explains danger level symbols (Danger, Warning, Caution) and information symbols.
Extent of Liabilities
Outlines manufacturer and installer responsibilities and limitations of liability.
Safety
General Safety Instructions
Details critical safety precautions, including gas leak procedures and temperature warnings.
Recommendations
Provides recommendations for qualified professionals, system maintenance, and the Benchmark Checklist.
Technical Specifications
Technical Data
Lists dimensions, clearances, electrical supply, and power consumption for the boiler models.
Clearances
Specifies required clearances around the boiler for installation, case removal, and servicing.
Description of the Product
General Description
Introduces the Baxi 400 Heat as a wall-mounted condensing boiler and lists its outputs.
Operating Principle
Explains how cooled flue gases and condensed water are discharged during operation.
Control Panel Description
Details the functions of the user interaction controller and indicator lights.
Standard Delivery
Lists the components included in the literature pack.
Accessories & Options
Mentions various optional extras available for the boiler.
Operation
Operation Checking Procedure & Basic Fault Identification
Provides a step-by-step guide to check boiler operation and identify basic faults.
Shutdown
Advises on system draining if the boiler will not be used for a long period.
Frost Protection
Explains how to prevent radiators and the system from freezing.
Settings
Setting the Boiler Flow Temperature
Describes how to adjust the boiler's flow temperature using the rotary knob.
Maintenance
General
States that the boiler requires annual servicing to maintain the warranty.
Maintenance Instructions
Provides instructions for checking the central heating system and cleaning the boiler exterior.
Filling the System
Explains the types of heating systems and the need for re-pressurisation in sealed systems.
Venting the System
Details the process of removing air from the radiators and system.
Draining the System
Outlines the procedure for draining the central heating system.
Troubleshooting
Fault Warning & Lock-out Codes
Explains boiler status light indications and codes for faults and lock-outs.
Fault Finding
Provides a table of common problems and their possible causes for troubleshooting.
Decommissioning
Decommissioning Procedure
Lists steps for safely switching off and draining the boiler for decommissioning.
Disposal
Disposal / Recycling
States that removal and disposal must be carried out by a qualified installer.
Environmental
Energy Saving
Offers tips for saving energy, such as not covering radiators and insulating pipes.
Room Thermostats and Settings
Discusses the impact of thermostat type and settings on energy consumption and provides tips.
Warranty
General
Explains that warranty activation requires a completed checklist, registration, and annual service.
Terms of Warranty
Refers to website for full terms and conditions and mentions the importance of the Benchmark Checklist.
Appendix
ErP Information
Details product fiche data including energy efficiency class, heat output, and consumption for boiler space heaters.
Package Fiche - Boilers
Explains calculations for package energy efficiency, including boiler, temperature control, and supplementary heat pump contributions.
Need help?
Do you have a question about the Heat 430 and is the answer not in the manual?
Questions and answers