Desa VDCFTNB Owner's Operation And Installation Manual page 20

INSTALLATION
Continued
4. Gently remove the cover of the thermostat
from the base. Grasp the sides of the cover
firmly and pull to separate from the base.
5. Feed the electrical wires through the rectangular
slots on each side of the base (see Figure 31).
WARNING: Do not con-
nect the thermostat to a power
source. Electrical shock and/or
a fire hazard will occur.
6. Connect one bare wire end to each terminal
("W" and "R") of the thermostat base (see
Figure 32).
Feed wires through
rectangular slots
Figure 31 - Back View of Thermostat Base
Terminal "W"
Terminal "R"
Figure 32 - Thermostat Base Terminals
"W" and "R"
20
W
R
www.desatech.com 116526-01A