Table of Contents
Advertisement
Quick Links
Register at www.Toro.com.
Original Instructions (EN)
Groundsmaster
Rotary Mower
Model No. 30606—Serial No. 313000001 and Up
Model No. 30606A—Serial No. 314000001 and Up
Model No. 30608—Serial No. 313000001 and Up
Model No. 30608A—Serial No. 314000001 and Up
Form No. 3376-227 Rev C
®
4100 and 4110
*3376-227* C
Advertisement
Table of Contents
Related Manuals for Toro 30608
Summarization of Contents
Safety Guidelines
Safe Operating Practices
Guidelines for safe operation, including training, preparation, and operational rules.
Preparation and Operation Guidelines
Steps before operation and guidelines for safe and effective mower use.
Machine Specifications and Certification
Sound Power Level
Guaranteed sound power level of the machine.
Sound Pressure Level
Sound pressure level at the operator's ear.
Vibration Level
Measured vibration levels for hand-arm and whole body.
Engine Emission Certification
Information on the engine's emission compliance standards.
Setup Procedures
Loose Parts and Media Verification
Verification of shipped parts and information on manuals.
Initial Greasing and Decal Replacement
Procedure for initial machine greasing and warning decal replacement.
Product Overview and Controls
Machine Controls Identification
Identification and function of key controls like pedals, switches, and levers.
Brake and Parking Systems
Operation of brake pedals, pedal locking latch, and parking brake.
Steering and Lighting Controls
Adjustment of tilt steering and operation of hazard lights.
Key Switch and Speed Control
Function of the key switch and speed control switches.
Operator Interface Controls
Engine Speed and PTO Operation
Control of engine speed and engagement of PTO switch.
Speed Range and Cruise Control
Adjustment of Hi-Lo speed and operation of cruise control.
Seat Adjustments and Power Point
Adjusting the operator's seat and using the power point.
Cab Control Systems
Weight Adjustment and Cab Wipers/AC
Adjusting seat weight and operating cab wipers and AC.
Cab Climate Controls
Using fan and temperature controls for cabin climate.
Window Latching and Operation
Operation and latching of windshield and rear window.
InfoCenter Operation and Icons
InfoCenter Display and Navigation
Using the InfoCenter display and navigating its menus.
InfoCenter Icon Descriptions
Explanation of various icons displayed on the InfoCenter.
InfoCenter Menu Navigation
Main Menu Options
Synopsis of Main Menu items: Faults, Service, Diagnostics.
InfoCenter Settings and Configuration
Customizing InfoCenter Settings
Modifying units, language, display, and auto idle settings.
Machine Information and Protected Menus
Accessing machine details and protected configuration settings.
Configuring Protected Menus
Setting Auto Idle Time Delay
Procedure to set the auto idle time delay.
Adjusting Maximum Mow and Transport Speed
Setting maximum allowed mow and transport speeds.
Machine Specifications
Cutting Width and Dimensions
Details on cutting width, overall dimensions, and clearances.
Weight and Wheel Specifications
Machine weight and specifications for wheel tread and base.
Operation: Before Operating
Pre-Start Checks: Oil and Cooling System
Checking engine oil level and coolant system before operation.
Fueling Procedures and Safety
Safe procedures and precautions for adding fuel to the machine.
Fuel Specifications and Safety
Petroleum Diesel Requirements
Specifications for diesel fuel, including types and additives.
Biodiesel Usage Guidelines
Precautions and guidelines for using biodiesel blends.
Checking Hydraulic Fluid
Recommended Hydraulic Fluids
Details on Toro's recommended hydraulic fluid and alternatives.
Hydraulic Fluid Properties and Specifications
Material properties and industry specs for suitable hydraulic fluids.
Checking Lubricant Levels
Planetary Gear Drive Oil Check
Procedure to check the oil level in the planetary gear drive.
Rear Axle Lubricant Check
Procedure to check the lubricant level in the rear axle.
Rear Axle Gear Box Lubricant Check
Procedure to check the lubricant level in the rear axle gear box.
Tire Pressure and Wheel Torque Checks
Checking Tire Pressure
Procedure to check and maintain correct tire pressure.
Wheel Nut and Bolt Torque Check
Procedure to check and tighten wheel nuts and bolts.
Adjusting Cutting Unit Height-of-Cut
Center Cutting Unit Height Adjustment
Procedure to adjust the cutting height of the center unit.
Wing Cutting Unit Height Adjustment
Procedure to adjust the cutting height of the side cutting units.
Cutting Unit Adjustments
Cutting Unit Rollers Mounting
Procedure for mounting cutting unit rollers based on cutting height.
Blade Clearance and Adjustment
Ensuring proper blade clearance for optimal cutting unit operation.
Correcting Cutting Unit Mismatch
Procedure to correct uneven cutting caused by blade mismatch.
Cutting Unit Setup and Alignment
Front and Side Cutting Unit Setup
Steps for setting up front and side cutting units.
Matching Cutting Heights Between Units
Procedure to match cutting height across multiple units.
Adjusting Operator Mirrors
Adjusting rear and side view mirrors for optimal visibility.
Engine Operation and Safety
Aiming the Headlights
Procedure for properly aiming the headlights.
Starting and Stopping the Engine
Detailed steps for starting and stopping the engine safely.
Cutting Grass with the Mower
Instructions for operating the mower to cut grass effectively.
Diesel Particulate Filter (DPF) Regeneration
DPF Soot Accumulation and Warnings
Explanation of soot accumulation and engine warning messages.
Engine Warning Messages for Soot
Interpreting engine warning messages related to soot accumulation.
Diesel Particulate Filter Regeneration Types
Regeneration During Operation
DPF regeneration types performed during normal machine operation.
Regeneration Requiring Machine Parking
DPF regeneration types requiring the machine to be parked.
Reset and Parked DPF Regeneration
Reset Regeneration Procedure
Procedure for resetting the DPF regeneration cycle.
Parked Regeneration Procedure
Information and steps for performing parked DPF regeneration.
Preparing for Parked or Recovery Regeneration
Prerequisites for performing parked or recovery regeneration.
Advanced Operation Features
Smart Power and Reversing Fan
How Smart Power and reversing fan optimize performance.
Auto Idle, Cruise Control, and Engine Speed
Operation of auto idle, cruise control, and engine speed adjustments.
Mow and Transport Speed Settings
Supervisor and operator settings for mow and transport speeds.
Safety Systems Checks
Checking Interlock Switches
Procedure to check the function of safety interlock switches.
Using the Rollover Protection System (ROPS)
Safety instructions and procedures for using the ROPS.
Machine Handling and Operation
Pushing, Towing, and Lifting the Machine
Procedures for pushing, towing, and using jacking points.
Tie Downs and Operating Characteristics
Securing the machine and understanding its operating characteristics.
Operating Tips for Optimal Performance
Mowing Conditions and Intervals
Guidance on mowing when grass is dry and at proper intervals.
Height-of-Cut and Pitch Adjustment
Selecting cutting height and adjusting cutting unit pitch.
Transporting and Post-Operation Cleaning
Instructions for transporting and cleaning the machine after use.
Maximizing Air Conditioner Performance
Tips to improve air conditioning performance.
Maintenance Procedures
Recommended Maintenance Schedule
Schedule of maintenance procedures based on service intervals.
Lubrication Procedures
Greasing Bearings and Bushings
Procedure for lubricating machine bearings and bushings with grease.
Traction Unit and Center Cutting Unit Lubrication
Grease fitting locations for traction unit and center cutting unit.
Lift Assembly Lubrication
Center Lift Assembly Lubrication
Lubrication points for center lift assemblies.
Wing Lift Assembly and Cutting Unit Lubrication
Lubrication points for wing lift assemblies and cutting units.
Engine Maintenance: Air Cleaner
Air Cleaner Inspection and Service
Checking the air cleaner body and servicing the air cleaner filter.
Engine Maintenance: Engine Oil
Engine Oil Specifications
Recommended engine oil types and viscosity grades.
Checking Engine Oil Level
Procedure for checking the engine oil level.
Fuel System Maintenance
Fuel System Servicing and Safety
General safety precautions and procedures for servicing the fuel system.
Fuel Tank and Lines Inspection
Procedures for fuel tank draining and fuel line inspection.
Water Separator Servicing
Procedure for draining the water separator and replacing the filter.
Drive System Maintenance
Adjusting Traction Pedal Angle
Procedure to adjust the traction pedal angle for operator comfort.
Changing Planetary Gear Drive Oil
Procedure for changing the planetary gear drive oil.
Rear Axle and Front Tire Maintenance
Changing Rear Axle Lubricant
Procedure for changing the rear axle lubricant.
Checking Rear Wheel Toe-In
Procedure to check and adjust rear wheel toe-in.
Changing Front Tires
Procedure for changing the front tires on the machine.
Cooling System Maintenance
Servicing the Engine Cooling System
Procedure for cleaning and inspecting the engine cooling system.
Brake Maintenance
Adjusting Service Brakes
Procedure to reduce free travel in the brake pedals.
Belt Maintenance
Servicing Alternator and Compressor Belts
Procedure to check and adjust alternator and compressor belt tension.
Blade Drive Belt Maintenance
Re-tensioning Blade Drive Belts
Procedure for checking and re-tensioning blade drive belts.
Replacing Blade Drive Belt
Procedure for replacing the blade drive belt.
Hydraulic System Maintenance
Changing the Hydraulic Fluid
Procedure for changing the hydraulic fluid in the system.
Hydraulic System Maintenance: Filters and Lines
Replacing Hydraulic Filters
Procedure for changing the hydraulic filters.
Checking Hydraulic Lines and Hoses
Inspection of hydraulic lines and hoses for leaks and wear.
Mower Maintenance: Counterbalance and Front Cutting Unit
Adjusting Counterbalance Pressure
Procedure to test and adjust counterbalance pressure.
Pivoting Front Cutting Unit Upright
Procedure to tilt the front cutting unit to an upright position.
Mower Maintenance: Cutting Unit Pitch
Measuring and Adjusting Cutting Unit Pitch
Procedure for measuring and adjusting cutting unit pitch for all units.
Mower Maintenance: Castor Components
Servicing Castor Arm Bushings
Procedure for checking and replacing castor arm bushings.
Servicing Castor Wheels and Bearings
Procedure for servicing castor wheels and their bearings.
Blade Maintenance
Checking for Bent Blades
Procedure to check for bent blades after striking an object.
Blade Removal, Installation, Inspection, and Sharpening
Procedures for blade replacement, inspection, and sharpening.
Cab Maintenance: Air Conditioning System
Cleaning the Air Conditioning Coil
Procedure for cleaning the air conditioning coil.
Cleaning the A/C Condenser Screen
Procedure for cleaning the A/C condenser screen.
Storage and Seasonal Preparation
Preparing the Traction Unit for Storage
Steps for cleaning, checking, and servicing the traction unit for storage.
Preparing the Engine for Storage
Steps for draining oil, flushing fuel, and servicing the air cleaner.
The Toro Total Coverage Guarantee
Warranty Coverage and Conditions
Details of warranty coverage, exclusions, and owner responsibilities.
Obtaining Warranty Service and General Conditions
Procedures for obtaining service and general warranty terms.
Battery and International Warranty Information
Specific warranty for batteries and information for international customers.
Need help?
Do you have a question about the 30608 and is the answer not in the manual?
Questions and answers