Sangean DT-220A User Manual page 7

Operating the radio-search tuning
1. Switch on your radio by pressing the
Power Button.
Note: The radio is originally set to be 90 minutes
auto shut off after Power is switched on
( symbol will appear on the display).
If you don't need this feature, press Power
button for more than 2 seconds until
removed from the display.
2. Select the required waveband by repeatedly
pressing the Band button. On FM bands,
fully extend the Telescopic aerial. On AM (MW)
band, rotate your radio for best reception.
3. Press and hold down either the Tuning Up or Down
buttons until frequency in the display begins to
change rapidly. Release the button.
4. Your radio will scan the selected waveband,
stopping each time if finds a station of
sufficient strength. Adjust the volume control to the
required level.
6
symbol