Download Print this page

Advertisement

Quick Links

Operator's manual
N Series
HiTech N82, N92

Advertisement

loading
Need help?

Need help?

Do you have a question about the HiTech N92 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Precautions and Rules
Safety Rules and General Precautions
Summarizes regulations, safety features, and general warnings for tractor operation.
Carbon Monoxide Hazards
Warns against running the engine indoors with closed doors due to carbon monoxide.
Safe Downhill Driving Practices
Advises on gear selection and braking when driving downhill to prevent overheating.
Running Speed and Stability
Stresses adjusting speed to conditions and avoiding sudden changes to prevent tipping.
PTO Driven Attachment Safety
Emphasizes using prescribed safety devices with PTO-driven machines.
Transporting Implements Safely
Requires locking check links with pins when transporting implements.
Cab Emergency Exits
Lists the four emergency exits available in the tractor cab.
Stair Safety
Advices to keep stairs clean to prevent slippery conditions and injury.
Trailer Load Securement
Details securing trailer loads, visibility, and marking of projecting loads.
Trailer Coupling and Braking
Advises coupling trailers correctly and using trailer brakes as required by law.
Front-End Loader Operation Safety
Warns about tip-over risk and keeping the work area clear when using a front loader.
Pre-Drive Checks and Cornering
Recommends checking tractor condition, adjusting mirrors, and being aware of sway when cornering.
Differential Lock Usage
States the differential lock should only be used on loose or slippery ground.
Ballast Weight Requirements
Explains the need for front axle ballast for stability and proper steering.
Safe Implement Attachment
Warns of accident risk when attaching implements and the need for parking brake.
Damage and Cab Repair
Stresses repairing damage and prohibits welding/drilling on the cab.
Slow Moving Vehicle (SMV) Emblem
Advises using the SMV emblem and rotating light when driving on public roads.
Mobile Phone Interference
Warns that mobile phones can affect electric linkage function.
Hydraulic and Fuel Pressure Hazards
Alerts to high-pressure fluid injection injury risk and not to touch leaks.
Implements Maintenance Safety
Requires lowering implements before maintenance and stopping the engine.
Motor Noise and Hearing Protection
Recommends hearing protection when operating the engine or working nearby.
Fire and Explosion Hazards
Prohibits naked flames, smoking, and sparks near fuel and batteries due to explosion risk.
Tractor Cleaning and Fire Risk
Advises keeping the tractor clean and avoiding fire risks by cleaning before use.
Fire Response and Viton Seals
Warns about corrosive acid from viton seals at high temperatures and proper decontamination.
Engine Stalling and Restarting
Provides instructions for stopping and restarting the engine after stalling.
Lower Link Quick Coupling Safety
Emphasizes cleaning quick couplings and warns of implement release danger.
General Tractor Description
Tractor Illustration and Series Overview
Provides an illustration of the Valtra N82h/N92h and describes its series category.
Tractor Components on Left Side
Details engine oil, coolant, fuel, air intake, and auxiliary system components.
Tractor Components on Right Side
Identifies engine, fuel system, and battery components located on the right side.
Rear Tractor Components and Service
Covers rear components, service information, and initial inspection.
Engine Description and Operation
Explains the principle of turbocharged engines and their benefits.
Power Transmission Systems
Introduces the gearbox and power shuttle systems.
HiTech Power Shuttle Operation
Explains the shuttle lever, multi-disc clutches, and HiShift operation.
Gearbox Specifications
Details the speed gearbox with four synchronized gears and three range gears.
Powershift System
Explains the 3-step Powershift, gear selection, and digital display.
Rear Axle and Differential Lock
Describes the rear axle, electro-hydraulic differential lock, and final drives.
Powered Front Axle Operation
Explains the electro-hydraulic engagement of the powered front axle and its braking function.
Power Take-Off (PTO) System
Details PTO speed selection, engagement, and available shaft types.
Brake System Details
Describes oil bath multi-disc brakes, parking brake, and optional trailer brakes.
Steering System Operation
Explains the hydrostatic steering system and its priority valve.
Hydraulic System Overview
Describes the low and high pressure circuits, pumps, and controlled functions.