Advertisement
Advertisement
Related Manuals for KORAD KWR103
Summarization of Contents
Front Panel Description
Display Indicators
Identifies indicators for Lock, Voltage, Current, OVP, OCP, CV, CC status.
Function Buttons
Explains functions of OVP, OCP, LOCK, ON/OFF, VSET, ISET keys and their associated operations.
Front Panel Advanced Functions
Memory and Dynamic Output Functions
Details M1-M5 quick recall/storage and dynamic output modes.
Adjustment and Output Terminals
Explains the ADJUST function and front output terminals with current limit.
Rear Panel Interface
AC Input and Switching
Covers AC power input and voltage selection.
Monitoring and Trigger Ports
Details SENSE and TRIG ports for remote monitoring and triggering.
Output Terminals (30A)
Describes the main output terminals with a 30A current limit.
Communication Ports
Identifies USB, RS232, and LAN communication interfaces.
Operating Instructions
Memory Recall and Storage (M1-M5)
How to recall and store settings using memory buttons M1-M5.
Over Voltage Protection (OVP)
Steps to set OVP value and enable/disable OVP function.
Over Current Protection (OCP)
Steps to set OCP value and enable/disable OCP function.
External Trigger Function
How to activate and use the external trigger input.
Remote Compensation Function
How to activate remote compensation using the SENSE terminal.
Key Lock and Buzzer Settings
How to lock/unlock keys and turn the buzzer on/off.
RS485 ID Setting Function
How to set the RS485 address (ID) for communication.
Voltage and Current Slope Setting
How to adjust the output voltage and current slope.
Dynamic Output Function and Recall
Details on setting up, executing, and recalling dynamic output sequences.
Voltage and Current Priority Function
How to set priority between voltage and current output.
PC Communication
Guidance for communicating with the power supply via PC.
Communications
COM Port Setup
Configuration settings for serial communication ports.
RS485 Command Examples
Examples of commands for controlling the power supply via RS485.
Need help?
Do you have a question about the KWR103 and is the answer not in the manual?
Questions and answers