Table of Contents
Advertisement
Manual and information to operate the engine FT 180,
FT220 FT 250
Date: April 2020
Mario Pasqualini
https://frankturbine.com/
mario@frankturbine.com
00436602427021
Alfred Frank
https://frankturbine.com/
alfred@frankturbine.com
00499947902762
Lorenz Bernreiter
https://frankturbine.com/
schubrohre@frankturbine.com
00436645030237
Advertisement
Table of Contents
Related Manuals for Frank Turbine FT 250
Summarization of Contents
General Information and Safety
1.1. Preface
Introduction to the Frank Turbine jet engine, detailing its characteristics and purpose.
1.2. Meaning of symbols
Explanation of warning symbols used in the manual to indicate hazards and safety precautions.
1.3. Warnings and safety instructions
Crucial safety guidelines and manufacturer disclaimers regarding engine operation and potential risks.
Product Information and Components
2. Guarantee notices
Details on the warranty period, service requirements, and conditions for valid claims.
3. Scope of delivery
List of components included with the turbine engine package.
4. ECU (Electronic Control Unit)
Overview of the HORNET-III control system managing turbine parameters during operation.
System Setup and Connections
Connection of engine
Diagrams and guidelines for connecting the engine to its main components and fuel system.
Connection of the servo valve brushless ECU / HS 81Servo
Detailed instructions for wiring the servo valve, ECU, and specific servo models for engine control.
Connection of the magnetic valve (Kero Valve Pin)
Illustrates the connection of the magnetic valve, used as a fuel control element.
Operation and Maintenance
4.1. Fuel supply
Guidance on setting up the fuel system, including line types, filters, and tank recommendations.
4.2. Power supply
Specifies the required battery type and capacity for the ECU and drive system.
4.3. Fuels
Details recommended fuels and oil types for optimal engine performance and warranty.
5. Engine operation
Procedures for starting, operating, and shutting down the turbine engine safely.
6. Pumpvalues
Specifications for pump voltage and calibration parameters for different engine models.
6.1. Maintenance
Requirements for engine testing and maintenance after a specified number of operating hours.
Need help?
Do you have a question about the FT 250 and is the answer not in the manual?
Questions and answers