Table of Contents
Advertisement
Manual and information to operate the engine FT 180,
FT220 FT 250
Date: April 2020
Mario Pasqualini
https://frankturbine.com/
mario@frankturbine.com
00436602427021
Alfred Frank
https://frankturbine.com/
alfred@frankturbine.com
00499947902762
Lorenz Bernreiter
https://frankturbine.com/
schubrohre@frankturbine.com
00436645030237
Advertisement
Table of Contents
Related Manuals for Frank Turbine FT220
Summarization of Contents
Meaning of Symbols
General Warning (Observe Indications)
Emphasizes general warnings that must be observed by the engine user.
General Warning (Property/Injury Risk)
Identifies hazards to property and personal injury.
Warning Hot Surface
Warns about hot surfaces during operation, indicating a risk of combustion.
Warning of Fire Hazard
Warns that the hot exhaust can ignite nearby fuels and objects.
Hearing Protection Required
Advises using hearing protection as engine noise exceeds 85 dB in close range.
Warnings and Safety Instructions
Liability Disclaimer for Improper Operation
Manufacturer disclaims liability for engine/person damage due to improper operation.
Risk of Severe Injury
Inappropriate operation poses a risk of severe or fatal injury.
Max RPM Limit
Exceeding the engine's maximum RPM is prohibited.
Danger Zone Restriction
Prohibits staying in the danger zone around rotating turbine parts and behind the engine.
No Hands/Objects in Danger Zone
Prohibits placing hands or objects in the turbine danger zone.
Engine Connection Diagrams
Connection with Main Fuel Tank
Diagram showing engine connection with a single main fuel tank.
Connection with Hopper Fuel Tank
Diagram illustrating engine connection using a hopper fuel tank system.
Engine Operation
Fuel Input and Checks
Steps for fuel input and pre-operation checks.
Start Procedure with ECU
Procedure for starting the engine using the ECU.
Engine Switch Off
Steps for safely shutting down the engine.
General Checks During Operation
Routine checks to perform during operation.
Need help?
Do you have a question about the FT220 and is the answer not in the manual?
Questions and answers