Connecting Zvc7610 To Your Network - Zonet ZVC7610 User Manual

2.2 Connecting ZVC7610 to Your Network

Use the provided RJ-45 Ethernet cable to connect the ZVC7610 to your network. The
ZVC7610 will power ON automatically after you connect the AC Power Adapter to the
power connector. You may verify the power status from the Power LED on the front panel.
Once you completed the connection, Link LED will start flash in green, ZVC7610 is at
standby mode, and it is ready to use.
RJ-45 Ethernet Cable Connector
- -
7