Tools - Zonet ZVC7610 User Manual

4.9 Tools

The Tools menu provides commands that allow you to restart and/or reset the ZVC7610.
You can also backup, restore your configuration, and upgrade firmware for the ZVC7610.
Factory Reset
Click Reset to restore all factory default settings for the ZVC7610.
System Reboot
Click Reboot to restart the ZVC7610. It will power OFF the under then power ON
automatically. ZVC7610 configuration will be retained after System Reboot.
Configuration
You can save your ZVC7610 configuration as a backup file on your computer. You can
restore it by retrieving the backup file.
- Backup: Click Get the backup file to save the current configuration of the ZVC7610
to your computer.
- Restore: Click Browse to locate the backup file and click Restore the configuration
of the ZVC7610.
Update Firmware
It displays the current firmware version. You can upgrade it once you obtained a latest
version of firmware.
- Select the firmware: Click Browse to locate the updated firmware file and click
Update.
NOTE: ZVC7610 must be power ON during firmware upgrade. Otherwise, the original
firmware may corrupt due to the failure of firmware upgrade.
- -
26