Related Manuals for Philips DDL709-FVP-7HWS
Summarization of Contents
Important Information
Safety
Read all instructions before use. Warranty void if instructions are not followed. Use manufacturer-specified accessories.
Caution
Avoid explosion risks, use only approved power supplies, and do not short-circuit batteries. Use authorized parts for replacement.
Disposal of used products and batteries
Follow local regulations for electronic waste and battery recycling to prevent environmental harm.
Assembly
Packing list
Lists all components included in the package, including outside/inside escutcheons, mortise, fixing plate, etc.
Exploded views
Diagram illustrating the internal and external parts of the smart door lock for assembly reference.
Notice before assembling
Information regarding door opening direction compatibility and door thickness suitability for installation.
Adjustable latch instructions
Step-by-step guide on how to adjust the lock latch orientation for proper door fitting.
Assembly procedure
Detailed instructions for installing the smart door lock on the door, including component placement.
Get to know your smart lock
Outside escutcheon
Identifies and describes the external components of the smart lock, including camera, keypad, and fingerprint sensor.
Inside escutcheon
Identifies and describes the internal components of the smart lock, including display, buttons, and rotary knob.
Settings
Instructions before setting
Explains system modes (general, dual-verification) and provides a user code table for tracking access methods.
Master mode
Details how to enter and operate the master mode for configuration and management of the smart lock.
Master fingerprint
Instructions for enrolling or changing the master fingerprint for administrative access to the lock.
Add a user PIN code
Guide on adding new PIN codes for users, including re-entry for confirmation and success prompt.
Add a user fingerprint
Steps for enrolling a new user's fingerprint, involving multiple scans and confirmation prompts.
Add a user key tag
Procedure for enrolling a new key tag, requiring enrollment and a success prompt for confirmation.
Add a one-time PIN code
Instructions for creating and using temporary PIN codes, requiring entry and re-entry for confirmation.
Add a Face ID
Process for adding a Face ID, involving positioning the face correctly and following voice prompts.
Add or change a master fingerprint
Guide to adding a new master fingerprint or overwriting an existing one with a new scan.
Modify master PIN code
Steps to change the existing master PIN code, requiring the current code and new code entry.
Delete a user
Procedure for removing user information (PIN, fingerprint, key tag, Face ID) from the lock system.
Language settings
Instructions for selecting the user interface language, with options for Chinese and English.
Volume settings
Guide to adjusting the lock's audio feedback volume, including options for higher, lower, or mute.
APP binding guidance
Steps to download the app and connect the door lock for remote control and management.
Eco settings
Configuration for power-saving modes, including options for video, facial recognition, and sensor settings.
Dual-verification mode
Enabling or disabling dual-verification mode, requiring two access methods for unlocking.
Infrared handle
Instructions to enable or disable the infrared handle function for unlocking the door.
Network configuration
Steps to connect the smart lock to a Wi-Fi network for remote control and app integration.
Get to use your lock
Outdoor/ indoor unlock
Instructions on how to unlock the door using PIN code, fingerprint, key tag, and Face ID.
Other features
Indoor infrared unlock
Enables unlocking the door from inside using touch and infrared sensors on the handle.
Outside forced lock
Triggers an alert when unlocking from inside while the door is locked, enhancing security.
Mute button
Allows enabling or disabling audio prompts and voice guidance for silent operation.
Default settings
Procedure to reset the lock to factory default settings, erasing all user data.
Doorbell
Functionality where the indoor speaker alerts the host and captures visitor photos via the app.
Video intercom
Enables real-time two-way audio/video communication with visitors via the connected mobile app.
Display
Information on using the indoor display to view the doorway and adjust settings like duration and brightness.
Indicators
Status indicator
Explains the meaning of indicator light colors (blue, green, red) for system status, unlocked, and locked states.
Low battery level indicator
Describes the red flashing indicator and voice prompt for low battery status, advising timely replacement.
Outside forced lock indicator
Indicates the white light on digit '8' when the outside forced lock mode is activated.
Indoor deadlock indicator
Shows the keypad display combination '15937(X)' and voice prompt when inside deadlock is enabled.
System-locking indicator
Explains digit '2' flashing for 100s after 5 incorrect inputs, indicating system lock.
Troubleshooting
Alert types
Details various alerts like forced lock, low battery, and anti-dismantling, explaining triggering and alert modes.
Deadbolt abnormality alert
Explains alerts for abnormal deadbolt function, where the door fails to lock or unlock.
Motion detection alert
Describes alerts for suspicious persons loitering, triggering video capture and app notifications.
How to apply an external power supply
Instructions for powering the lock with a 5V power bank when the internal battery is insufficient or system crashes.
Battery replacement
Guide on locating and replacing the Li-polymer battery in the inside escutcheon.
Battery recharge
Instructions for removing the battery and charging it via a charging cable.
Need help?
Do you have a question about the DDL709-FVP-7HWS and is the answer not in the manual?
Questions and answers