Table of Contents
Related Manuals for Case Magnum 370
Summarization of Contents
1 GENERAL INFORMATION
Note to the Owner
Information about safe operation, adjustment, and routine maintenance of the Magnum tractor.
Engine Tampering and Tractor Use
Prohibitions on tampering with engine systems and guidelines for intended tractor use.
Electro-magnetic Compatibility (EMC)
Compliance with regulations on electro-magnetic emissions and add-on equipment.
Manual Scope and Training Requirements
Details on manual content, operator training, and service personnel requirements.
Product Identification Details
Information on tractor model, product identification number, and ROPS serial number.
3 CONTROLS/INSTRUMENTS
Operator Platform Access
Instructions for accessing the operator's platform via cab and lower step.
Operator and Passenger Seats
Overview and control identification for operator and passenger seats.
Control Locations
Details on forward, left-hand, right-hand, rearward, overhead, and exterior controls.
Instrument Cluster Overview
Explanation of the instrument cluster, including gauges, displays, and keypad.
4 OPERATING INSTRUCTIONS
Unit Commissioning and Starting
Procedures for commissioning, normal engine starting, and cold starting aids.
Stopping and Moving the Unit
Instructions for stopping the engine and operating powershift and CVT transmissions.
5 TRANSPORT OPERATIONS
Road Transport Safety
Guidelines for road transport, including warning lamps and safe speed.
Shipping and Recovery Transport
Procedures for securing the tractor for shipping and safety rules for recovery transport.
6 WORKING OPERATIONS
General Working Information
Overview of working operations for the tractor.
Power Take-Off (PTO) Operations
Details on rear and front PTO operations, including safety rules.
Hitch and Attachment Operations
Information on rear hitch, front hitch, drawbars, and trailer hitches.
Hydraulic and Auxiliary Systems
Operation of auxiliary connections, remote control valves, and ballasting the tractor.
Mechanical Front Drive (MFD) Axles
Information on MFD axle settings, steering, and fender configurations.
7 MAINTENANCE
General Maintenance Information
Overview of safety rules, maintenance guidelines, and opening/closing hood.
Maintenance Chart and Warnings
Details on maintenance charts, warning message display, and fluid capacities.
Scheduled Maintenance Intervals
Maintenance tasks scheduled by operating hours, from 10 hours to 3600 hours.
As-Required Maintenance and Storage
Tasks performed as needed, including fire prevention, and storage procedures.
8 TROUBLESHOOTING
Fault Code Resolution
Guide to understanding and resolving fault codes and display warnings.
Symptom-Based Troubleshooting
Troubleshooting common symptoms related to engine, transmission, hydraulics, and more.
9 SPECIFICATIONS
Engine and Powertrain Specifications
Details on engine, powertrain, and operating speed specifications.
Vehicle Dimensions and Weight
Information on vehicle dimensions, shipping weight, and maximum operating weight.
10 ACCESSORIES
Farming System Displays
Information on farming system displays and related accessories.
Mounting and Connections
Details on chemical tank mounting and trailer brake connections.
General Accessories
Information on other general accessories available for the tractor.
Need help?
Do you have a question about the Magnum 370 and is the answer not in the manual?
Questions and answers