Advertisement
Advertisement
Related Manuals for Gardner Denver EBH99H
Summarization of Contents
SAFETY LABEL INFORMATION
DANGER
Indicates a hazard with a high level of risk, which if not avoided, WILL result in death or serious injury.
WARNING
Indicates a hazard with a medium level of risk which, if not avoided, COULD result in death or serious injury.
CAUTION
Indicates a hazard with a low level of risk which, if not avoided, MAY result in a minor or moderate injury.
SAFETY PRECAUTIONS
DANGER - Failure to observe these notices could result in injury to or death of personnel.
Critical safety warnings for personnel protection against severe hazards.
SECTION 1 GENERAL INFORMATION
COMPRESSOR
Describes the Gardner Denver Rotary Screw compressor's basic design and operation.
COMPRESSION PRINCIPLE
Explains the mechanics of air compression using meshing helical rotors.
AIR FLOW IN THE COMPRESSOR SYSTEM
Details the airflow path from intake through the system to discharge.
LUBRICATION, COOLING AND SEALING
Details the oil system's role in lubrication, cooling, and sealing.
TURN VALVE (ELECTRA-SAVER ONLY)
Explains the function of the turn valve in regulating rotor volume.
SECTION 2 INSTALLATION
GENERAL
Initial checks and procedures upon unit receipt.
LIFTING UNIT
Proper methods for lifting and transporting the compressor unit safely.
LOCATION
Guidelines for selecting an optimal installation environment.
Air-Cooled Units
Specific air flow and cleaning requirements for air-cooled models.
INSTALLATION FOR COLD WEATHER OPERATION
Recommendations for installing and operating in cold climates.
AUXILIARY AIR RECEIVER
Considerations for using an auxiliary air receiver for capacity.
MOISTURE SEPARATOR/TRAP
Information on the integrated moisture separation system.
CONTROL PIPING
Notes on factory-wired control systems and lack of external piping.
INLET LINE
Specifications and requirements for the compressor inlet line.
Extreme Cold Weather Operation
Additional procedures for operating in extreme sub-freezing temperatures.
DISCHARGE SERVICE LINE
Details on the discharge line connection and manifolding.
BLOWDOWN VALVE PIPING
Explanation of the blowdown valve's piping configuration.
WATER PIPING (Water-Cooled Heat Exchanger Models Only)
Connectors and requirements for water piping on cooled units.
Need help?
Do you have a question about the EBH99H and is the answer not in the manual?
Questions and answers