Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Icom F5061 Series
Summarization of Contents
What is Covered in this Guide
Explaining Digital Squelch
Details the various settings that enable squelch to open in digital radios.
RAN Codes Explained
Digital equivalents to CTCSS tones, ranging from 0 to 63.
Unit (Individual) IDs
Allow for selective calling and identification of individual radios.
Talk Groups Explained
Enable selective calling to preprogrammed groups of radios.
Setting Squelch with RAN Codes and IDs
Squelch Type OFF
Squelch opens only if frequencies match; RAN codes, Talk groups, and IDs are ignored.
Squelch Type RAN
Frequency and RAN code must match for squelch to open.
Squelch Type SEL
Frequency, RAN code, and Talk Group/Individual ID must match for squelch to open.
Selecting Digital Features
Individual Call Digital Features Overview
Lists available digital features for individual calls: Select Call, Status, SDM, Call Alert, etc.
Talk Group Call Digital Features Overview
Lists available digital features for talk group calls: Select Call, Status, SDM, Call Alert.
Key Press Sequence for Digital Features
Step-by-step guide to accessing digital features using programmable keys.
Programming for a Select Call using Individual IDs
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Squelch Type.
Individual ID List Window Configuration
Setup for Individual IDs and their names for selective calling.
Individual Setting Window Configuration
Configuration for Individual Setting Window, specifically 'Log for Individual Call'.
Option Window Configuration
Settings for Option Window: Unit ID Display, Reset Timer.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Make an Individual Select Call
Steps to initiate a select call to an individual radio.
Programming a Talk Group for Selective Calls
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Talk Group ID, Squelch Type.
Talk Group ID List Window Configuration
Setup for Talk Group IDs and their names for selective calling.
Talk Group Setting Window Configuration
Settings for Talk Group Setting Window: Log for Individual Call.
Option Window Configuration
Settings for Option Window: Talkgroup Display, Reset Timer.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Make a Talk Group Select Call
Steps to initiate a select call to a talk group.
Programming for Status Messages
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Talkgroup ID, Squelch Type.
Status List Window Configuration
Configuration for Status List Window: RX Status, TX Status.
Status Setting Window Configuration
Settings for Status Setting Window: Allow Poll, Poll TX.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Send a Status Message
Steps to send a status message to another radio or group.
Programming for Short Data Messages (SDM)
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Talkgroup ID, Squelch Type.
SDM List Window Configuration
Configuration for SDM List Window: SDM text entry.
SDM Setting Window Configuration
Settings for SDM Setting Window: RX setting.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Send a Short Data Message
Steps to send a pre-programmed short data message.
Programming SDM from the Front Panel
Instructions to edit or enter new SDM messages directly from the radio keypad.
Programming for Call Alert
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Talkgroup ID, Squelch Type.
Call Alert Window Configuration
Configuration for Call Alert Window: RX, TX, Log for Call Alert.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Send a Call Alert
Steps to send a Call Alert signal to a target radio.
Programming for Radio Check
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Squelch Type.
Radio Check Window Configuration
Configuration for Radio Check Window: RX, TX settings.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Send a Radio Check
Steps to send a Radio Check signal to a target radio.
Programming for Stun
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Squelch Type.
Stun Window Configuration
Configuration for Stun Window: RX, TX, Mode settings.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Send a Stun Signal
Steps to send a Stun signal to a target radio.
Programming for Revive
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Squelch Type.
Revive Window Configuration
Configuration for Revive Window: RX, TX settings.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Send a Revive Signal
Steps to send a Revive signal to a target radio.
Programming for Kill
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Squelch Type.
Kill Window Configuration
Configuration for Kill Window: RX, TX settings.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Send a Kill Signal
Steps to send a Kill signal to a target radio.
Programming for Remote Monitor
Memory CH Window / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH Window / Zone Window Configuration
Settings for Memory CH Window: CH Type, Unit ID, Squelch Type.
Remote Monitor Window Configuration
Configuration for Remote Monitor Window: RX, TX, TX Timer.
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Monitor Another Radio
Steps to remotely monitor audio from a target radio.
Programming for Digital Encryption
Memory CH / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH / Zone Window Configuration
Settings for Memory CH Window: Scrambler/Encryption, Encryption Key List No.
Digital / Encryption Window Configuration
Configuration for Digital Encryption Window: Encryption Key(Dec).
Common Window Configuration
Settings for Common Window, specifically Key & Display Key.
To Make an Encrypted Call
Steps to make an encrypted call using programmed settings.
Programming LTR Operation
Memory CH / Zone Operation Window Configuration
Settings for Zone Operation Window: Zone Type, Repeater ch, Text.
Zone Operation/Repeater Setting Window Configuration
Configuration for Repeater Settings: Frequency, Atr, Save/Load Table.
Memory CH/Zone Window Configuration
Settings for Memory CH/Zone Window: TGID » RXID, TXID.
Programming Emergency Operation
Memory CH / Zone Operation Window Configuration
Settings for Zone Operation Window, including Zone Type.
Memory CH / Zone Window Configuration
Settings for Memory CH Window: Atr.
Emergency / Window Configuration
Configuration for Emergency Window: Emergency Text, Alert Level, Repeat Cycle, etc.
Common / Key & Display Window Configuration
Settings for Common/Key & Display Window: Key » Emer.
To Make an Emergency Call
Steps to make an emergency call using programmed settings.
Programming for IDAS Trunking
Zone Operation Configuration
Setting Zone Type to IDAS-Trunk.
Repeater ch Configuration
Adding repeater frequencies and selecting a home repeater.
IDAS-Trunk Folder Configuration
Configuring Individual and Talkgroup IDs within the IDAS-Trunk folder.
Alias List Setup
Setting up the Alias list for other radios, including ID and ID Name.
Talkgroup ID List Configuration
Entering Talk Group numbers and names.
Option Folder Configuration
Ensuring ANI settings match requirements for IDAS Trunking.
Memory CH Window Configuration
Entering radio Unit ID and choosing TG number in Memory CH window.
Talk Group Name in Text Configuration
Entering the Talk Group Name in the Text field.
Clone and Write Procedure
Steps to clone and write the configuration file into the radio.
Program Settings
Memory CH Window Settings
Defines settings for RX RAN, TX RAN, Unit ID, Talkgroup ID, and Squelch Type.
Digital/Option Window Settings
Defines settings for Send Data, Sentence, Send Status, Talkgroup Display, Unit ID Display, Ringer, Beep.
Log Settings
Settings for call logging and log action types.
Acknowledgement Delay and Wait Settings
Configure Ack TX Delay, Ack RX Wait, Attempt No., Ringer Repeat, Reset Timer.
Data Decode Comparison Settings
Ensures proper RAN code decoding for various digital signals.
Expert Window Settings
Settings for TX All Call and RX All Call for digital operation.
Emergency Window Settings
Detailed settings for the Emergency Window: Text, Alert Level, Timers, etc.
Need help?
Do you have a question about the F5061 Series and is the answer not in the manual?
Questions and answers