Dell Precision T7600 Owner's Manual page 56

Option
Password Change
TPM Security
CPU XD Support
Computrace
Chassis Intrusion
Admin Setup Lockout
Table 7. Power Management
Option
AC Recovery
Auto On Time
Deep Sleep Control
Fan Control Override
Wake on LAN
56
Description
Allows you to enable the disable permission to the System password when the
admin password is set.
Default Setting: Allow Non-Admin Password Changes is not selected
Allows you to enable the Trusted Platform Module (TPM) during POST.
Default Setting: The option is disabled.
Allows you to enable the Execute Disable mode of the processor.
Default Setting: Enable CPU XD Support
Allows you to activate or disable the optional computrace software. The options
are:
• Deactivate (Default Setting)
• Disable
• Activate
NOTE: The Activate and Disable options will permanently activate or disable
the feature and no further changes will be allowed.
This option is disabled by default.
Allows you to prevent users from entering Setup when an Administrator password
is set.
Default Setting: Disabled
Description
Specifies how the computer will respond when AC power is applied after a AC
power loss. You can set the AC Recovery to:
• Power Off (Default Setting)
• Power On
• Last Power State
Allows you to set the time at which the computer must turn on automatically. The
options are:
• Disabled (Default Setting)
• Every Day
• Weekdays
Allows you to define the controls when Deep Sleep is enabled.
• Disabled (Default Setting)
• Enabled in S5 only
• Enabled in S4 and S5
Controls the speed of the system fan. The default setting is set to Auto.
This option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting
and must be enabled in the operating system. This feature only works when the
computer is connected to AC power supply.