Related Manuals for Leine & Linde MRI 2302
Summarization of Contents
Encoder Series
Mounting Instructions Overview
Introduction to the mounting instructions for the encoder series.
Contact and Support
International Contact Information
Lists contact details for Leine & Linde offices worldwide.
Safety Precautions
Risk of Bodily Injury
Details potential hazards and risks of bodily injury during product operation.
Product Components and Identification
Parts Overview
Identifies the main components and parts of the encoder product.
Product Handling and Protection
Risk of Product Damage
Outlines environmental and operational factors that can damage the product.
Mounting Methods
Flange Mount Procedure
Step-by-step guide for mounting the encoder using a flange and axial screws.
ClampFit Mount Procedure
ClampFit Installation Steps
Detailed steps for friction-fitting the encoder using the ClampFit system.
Scanning Head Alignment and Tolerance
Aligning the Scanning Head
Instructions on centering the scanning head for proper alignment with the ring.
Angle Displacement Tolerance
Specifies the acceptable angle deviation for the scanning head relative to the ring.
Scanning Head Adjustments
Adjusting the Air Gap
Guidance on using a distance tool to set the correct air gap between the scanning head and ring.
Mounting the Scanning Head Unit
Steps to secure the scanning head unit after mechanical adjustments.
Mechanical Mounting Checks
Radial Runout and LED Indicator
Checks for radial runout and verifies the 'SCANNING' LED status for correct gap.
Electrical Mounting Checks
Shielded Cable and Disturbances
Ensures proper use of shielded cables and maintaining distance from interference sources.
Bending Radius and Component Compatibility
Checks cable bending radius and advises against mixing old and new encoder parts.
Accessories
Extra Scanning Head Placement
Guidance on positioning additional scanning heads 180 degrees apart.
Certificates and Approvals
UL/CSA Standards and Type Approval
Details compliance with UL/CSA standards, including power supply requirements.
CE Marking and Declaration of Conformity
Explains CE marking and conformity to EMC directives for products.
Product Usage and Disclaimer
System Integration and User Responsibility
Notes that products are components, require system testing, and use outside intended purpose is at user's risk.
Need help?
Do you have a question about the MRI 2302 and is the answer not in the manual?
Questions and answers