Table of Contents
Advertisement
2.
Copy the original or the latest motherboard BIOS file to the bootable floppy
disk.
3.1.2
ASUS EZ Flash 2 utility
ASUS EZ Flash 2 allows you to update the BIOS without having to go through the
long process of booting from a floppy disk and using a DOS-based utility. The
EZ Flash 2 utility is built in the BIOS chip so it is accessible by pressing <Alt> +
<F2> during the Power-On Self-Test (POST).
To update the BIOS using EZ Flash 2:
1.
Download the latest BIOS file for this motherboard from the ASUS website at
www.asus.com.
2.
Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3.
Launch EZ Flash 2 using either of the following methods.
(1) Press <Alt> + <F2> during POST to display the following.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
A:
Note
Note
(2) Enter the BIOS setup program. Go to Tools > EZ Flash 2 then press
<Enter>.
4.
Press <Tab> to locate the correct file. Press <Enter>.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS updating
process and automatically reboots the system when done.
•
This function supports devices such as USB flash disks and floppy disks
with FAT 32/16 format and single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUS BP5220/AS-D592
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
MXIC 25L8005
Current ROM
P5KPL-AM/PS
0003
07/22/08
A:\
[Enter] Select or Load
[Tab] Switch
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[B] Backup
[ESC] Exit
[Up/Down/Home/End] Move
3-3
Advertisement
Table of Contents
