Table of Contents
Related Manuals for ROJEK PK 315 A
Summarization of Contents
Machine Usage and Identification
1.1 Machine Specification
Defines the panel saw's primary function and intended use.
1.2 Worker Qualification
Specifies the necessary training and skills for machine operators.
1.3 Working Surroundings
Details the required environmental conditions for safe operation.
2 Machine Signification
How to identify machine type from its production shield.
Technical Data
3.1 Machine Dimensions
Illustrates physical dimensions and provides a table of measurements.
3.2 Available Machine Versions
Lists various configurations, motor powers, and specifications.
3.3 Machine Noise Data
Presents acoustic data including idle and working noise levels.
3.4 Reference Documentation
Lists applicable EU directives and international technical norms.
Safety Instructions
4.1 General Safety
General safety principles, symbols, and shield adherence.
4.2 Basic Safety Requirements
Essential safety measures before and during operation.
4.3 Personal Safety and Dress
Operator attire, PPE, and personal condition guidelines.
4.4 Operator Safety Regulations
Rules for safe operation, including checks and forbidden actions.
4.5 Maintenance Safety Regulations
Safety for personnel performing maintenance tasks.
4.6 Working Place Safety
Safety regarding lighting, space, and workplace organization.
Transport and Storage
5.1 Transport and Storage Procedures
Precautions for transport, handling, and storage conditions.
5.2 Machine Lifting Guidelines
Instructions and safety measures for lifting the machine.
Machine Positioning
6.1 Working Area Space Requirements
Defines the necessary clearance around the machine for operation.
6.2 Machine Levelling and Fixing
Instructions for leveling the machine and securing it to the floor.
6.3 PK 250A Demountable Parts Installation
Steps for installing detachable components on the PK 250A model.
6.3 PK 320A Demountable Parts Installation
Steps for installing detachable components on the PK 320A model.
Exhausting Connection
7 Exhausting Connection Details
Requirements for dust extraction and connection procedures.
Connecting to Mains
8.1 Mains Connection Procedure
Instructions for safely connecting the machine to the electrical supply.
8.2 Safety of Operation
General safety rules and precautions during machine operation.
8.3 Saw Blade Rotation Direction
Correct rotation direction for main and scoring saw blades.
8.4 Electric Parts Protection
Protecting electrical components and motor braking.
8.5 PK 250A Machine Control
Details on operating the control panel for the PK 250A model.
8.6 PK 315A/PK 320A Machine Control
Details on operating the control panel for PK 315A/PK 320A models.
Machine Operating Procedures
9.1 Saw Adjustments
Adjusting saw blades, riving knife, and fender.
9.2 Lengthwise Rule Adjustments
Adjusting the lengthwise ruler for cut width and parallelism.
9.3 Cross-Ruler Adjusting and Setup
Setting up and adjusting the cross-cut fence, stoppers, and angles.
9.4 Fixtures, Feeders, and Safety
Using fixtures, working places, safety instruments, and forbidden actions.
Tools and Saw Blade Exchange
10.1 Recommended Tools
Lists recommended tools and saw blade specifications.
10.2 Saw Blade Exchange Procedure
Step-by-step instructions for safely replacing saw blades.
Maintenance and Fault Remedy
11.1 Belt Tightening
Procedures for adjusting main and scorer drive belts.
11.2 Cleaning and Lubricating
Guidelines for regular cleaning and identifying lubrication points.
11.3 Remedy of Faults
Troubleshooting common machine issues and their solutions.
Machine Delivery Extent and Accessories
12.1 Accessories List
Lists standard and optional accessories included with the machine.
Special Accessories
13.1 Supporting Frame Roll
Details on the optional roll for the supporting frame.
13.2 Supporting Frame Profile
Information on the supporting profile for PK 320A/PK 315A models.
13.3 Digital Admeasuring on Lengthwise Ruler
Description of the digital measurement system for the lengthwise ruler.
13.4 Supporting Table
Instructions for using and positioning the supporting table.
13.5 Edging Foot Stop
How to use the edging foot stop for workpiece alignment.
13.6 Pusher/Handle for Sliding Table
Guidance on using the pusher handle for better sliding table control.
Post-Purchase Information
14 Spare Parts
Information on how to order replacement parts for the machine.
15 Guarantee Information
Details on warranty terms, claims, and repairs.
16 Machine Packing and Service Life
Handling of packing and guidelines for eco-friendly machine disposal.
Need help?
Do you have a question about the PK 315 A and is the answer not in the manual?
Questions and answers